ZyXEL Communications X6004 Uživatelská příručka stáhnout pdf (Strana 44)

Chapter 8 Extension Management Commands

X6004 CLI Reference Guide

8.3.1 SIP Extensions Command Examples

This example:

• Adds extension 5001 to an authority group with group ID ag_002.

• Configures the SIP extension authentication, office hour, call forwarding, codec and group

pickup settings:

8.4 FXS Interface Commands

The following table describes commands related to FXS connections on the X6004.

> pbx server sip peer add ag_002 5001

Info: Add specific SIP peer ok.

> pbx server sip peer set ag_002 1013 sip_username=1013,sip_secret=1013,

sip_description=1013,sip%pincode=1013"ext_officeday=tue:wed:thu:fri:sat:,ex

t_officehour=*,ext_dndaction=enable,ext_blindfwaction=disable,ext_busyfwact

ion=enable,ext_busyfwnum=1001,ext_noanswerfwaction=disable,ext_blacklistact

ion=disable,ext_callblockaction=enabl,ext_afterhouraction=enable,ext_afterh

ournum=1001,sip_codec=g729:ulaw:alaw:g726:h261:,sip_dtmfmode=rfc2833,sip_ma

ilbox=1013,grouppickup=enable

Table 20 FXS Interface Commands

COMMAND DESCRIPTION

pbx server fxs append channel groupid

<group_id> slot <slot> port <port>

Adds an FXS line to a specific authority group. The

authority group is identified by group ID.

Note: Group ID is automatically assigned by the

X6004 to each authority group you create.

The format of group ID is ag_XXX. Where

XXX is the sequential number in which

the authority group was created. ag_001

is given to the first authority group,

ag_002 is given to the second and so on.

pbx server fxs del channel groupid

<group_id> slot <slot> port <port>

Removes an FXS line from a specific authority group.

pbx server fxs gen conf Generates an FXS configuration for the X6004.

pbx server fxs get all information Displays FXS interface configuration on the X6004.

pbx server fxs mid <mid> slot <slot> port

<port> caller_id_dtmf_end <cidde>

Modifies the FXS port caller id dtmf end value.

pbx server fxs mid <mid> slot <slot> port

<port> caller_id_dtmf_start <cidds>

Modifies the FXS port caller id dtmf start value.

pbx server fxs mid <mid> slot <slot> port

<port> caller_id_payload_time <0~65535>

Modifies the FXS port caller id payload time value.

pbx server fxs mid <mid> slot <slot> port

<port> caller_id_reversal_time_

<0~65535>

Modifies the FXS port caller id reversal time value.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 117 118

Komentáře k této Příručce

Žádné komentáře

ZyXEL Communications X6004 Uživatelská příručka Strana 44

Komentáře k této Příručce