ZyXEL Communications X6004 Uživatelská příručka stáhnout pdf (Strana 26)

Chapter 4 SIP Server Commands

X6004 CLI Reference Guide

4.1.1 SIP Server Command Examples

This example:

• Sets the SIP listening port on the X6004 to 560.

• Sets the SIP client expiry duration value to 1000 seconds. This is how long SIP clients

remain registered with the X6004 before they need to reregister.

• Specifies the RTP port range as 10000-20000.

• Sets the ring time value for all clients to 20 seconds.

4.2 Voicemail Commands

The following table describes commands for configuring the Voicemail on the X6004.

4.2.1 Voicemail Command Examples

This example:

• Sets the maximum length of a voicemail message to 75 seconds.

• Sets the maximum amount of time for all messages per extension to 240 seconds.

• Displays the voicemail settings.

> pbx server sip set sip_port 560

> pbx server sip set expiration 1000

> pbx server sip set rtp_port_start 10000 rtp_port_end 20000

> pbx server sip set ring_time 20

Table 10 Voicemail Commands

COMMAND DESCRIPTION

pbx server voice_mail relay set domain

domain

Set the IP address or domain name of the mail relay server.

pbx server voice_mail relay set port

<0~65535>

Sets the port number of the mail relay server.

pbx server voice_mail relay show Displays the mail relay server settings.

pbx server voice_mail set maxlength

<1~90>

Set the maximum amount of time in seconds of a single

voicemail message.

pbx server voice_mail set quota <1~300> Sets the maximum amount of time in seconds of all

voicemail messages per extension.

pbx server voice_mail show Shows the configuration of voicemail functions.

> pbx server voice_mail set maxlength 75

zyTimer monitor thread release

> pbx server voice_mail set quota 240

zyTimer monitor thread release

> pbx server voice_mail show

maxmessage = [75]

quota = [240]

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 117 118

Žádné komentáře

ZyXEL Communications X6004 Uživatelská příručka Strana 26