
X6004 CLI Reference Guide
25
CHAPTER 4
SIP Server Commands
This chapter shows you how to configure auto provisioning via commands.
4.1 SIP Server Commands
The following table describes commands for configuring the SIP Server on the X6004.
Table 9 SIP Server Commands
COMMAND DESCRIPTION
pbx sip reload Reloads the X6004 SIP configuration.
pbx server sip set disable_codec <codec> Disables the specified codec on the X6004.
codec: At the time of writing you can globally disable the
G723.1 codec by entering g723. You need to restart the
X6004 for this setting to be applied.
pbx server sip set enable_codec <codec> Enables the specified codec on the X6004.
codec: At the time of writing you can globally enble the
G723.1 codec by entering g723. You need to restart the
X6004 for this setting to be applied.
pbx server sip set expiration
<sipconf_reg_time>
Sets the SIP register server expiry timeout value.
pbx server sip set realm
<sipconf_realmname>
Sets the SIP server realm name. A realm is a set of
accounts on a SIP server. When clients authenticate with a
SIP server they must provide the realm name along with
their username and password. Alphanumeric characters
are allowed; spaces are not allowed.
pbx server sip set ring_time <1~300> Sets the SIP server global ring time value in seconds.
pbx server sip set rtp_port_start
<1025~65535> rtp_port_end <1025~65535>
Sets the SIP server RTP port range.
pbx server sip set sip_port <1~65535> Sets the SIP register port on the X6004.
pbx server sip show disable_codec Shows the audio and video codecs that are disabled on the
X6004.
pbx server sip show expiration Shows the X6004 SIP register server expiry timeout value.
pbx server sip show realm Shows the X6004 SIP realm name.
pbx server sip show ring_time Shows the X6004 SIP server global ring time value.
pbx server sip show rtp_port Shows the RTP port range configuration for the X6004.
pbx server sip show sip_port Shows the SIP port configured on the X6004.
Komentáře k této Příručce