Zyxel-communications 5 Series Uživatelský manuál stáhnout pdf (Strana 671)

100

101

ZyWALL 5/35/70 Series User’s Guide

Chapter 47 Firmware and Configuration File Maintenance 671

47.4.2 Restore Using FTP Session Example

Figure 414 Restore Using FTP Session Example

Refer to Section 47.3.5 on page 666 to read about configurations that disallow TFTP and FTP

over WAN.

47.4.3 Restore Via Console Port

Restore configuration via console port by following the HyperTerminal procedure shown next.

Procedures using other serial communications programs should be similar.

1 Display menu 24.6 and enter “y” at the following screen.

Figure 415 System Maintenance: Restore Configuration

2 The following screen indicates that the Xmodem download has started.

Figure 416 System Maintenance: Starting Xmodem Download Screen

3 Run the HyperTerminal program by clicking Transfer, then Send File as shown in the

following screen.

Figure 417 Restore Configuration Example

ftp> put config.rom rom-0

200 Port command okay

150 Opening data connection for STOR rom-0

226 File received OK

221 Goodbye for writing flash

ftp: 16384 bytes sent in 0.06Seconds 273.07Kbytes/sec.

ftp>quit

Ready to restore Configuration via Xmodem.

Do you want to continue (y/n):

Starting XMODEM download (CRC mode) ...CCCCCCCCC

Type the configuration file’s location,

or click Browse to search for it.

Choose the Xmodem protocol.

Then click Send.

1 2 ... 666 667 668 669 670 671 672 673 674 675 676 ... 834 835

Komentáře k této Příručce

Žádné komentáře

Zyxel-communications 5 Series Uživatelský manuál Strana 671

Komentáře k této Příručce

Související produkty a manuály pro Hardware Zyxel-communications 5 Series