Zyxel-communications 5 Series Uživatelský manuál Strana 613

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 835
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 612
ZyWALL 5/35/70 Series User’s Guide
Chapter 42 Network Address Translation (NAT) 613
The following table describes the fields in this menu.
42.2 NAT Setup
Use the address mapping sets menus and submenus to create the mapping table used to assign
global addresses to computers on the LAN, DMZ and WLAN. Set 255 is used for SUA. When
you select Full Feature in menu 4, menu 11.1.2 or menu 11.2.2, the SMT will use Set 1 for
the first WAN port and Set 2 for the second WAN port. When you select SUA Only, the SMT
will use the pre-configured Set 255 (read only).
The server set is a list of LAN, DMZ and WLAN servers mapped to external ports. To use this
set, a server rule must be set up inside the NAT address mapping set. Please see the section on
port forwarding in Chapter 21 on page 395 for further information on these menus. To
configure NAT, enter 15 from the main menu to bring up the following screen.
Note: On a ZyWALL with two WAN ports, you can configure port forwarding and
trigger port rules for the first WAN port and separate sets of rules for the
second WAN port.
Figure 356 Menu 15: NAT Setup
Note: Configure DMZ, WLAN and LAN IP addresses in NAT menus 15.1 and 15.2.
DMZ, WLAN and LAN IP addresses must be on separate subnets.
Table 230 Applying NAT in Menus 4 & 11.1.2
FIELD DESCRIPTION OPTIONS
Network
Address
Translation
When you select this option the SMT will use Address Mapping Set 1
(menu 15.1 - see Section 42.2.1 on page 614 for further discussion). You
can configure any of the mapping types described in Chapter 21 on page
395. Choose Full Feature if you have multiple public WAN IP addresses
for your ZyWALL.
When you select Full Feature you must configure at least one address
mapping set.
Full Feature
NAT is disabled when you select this option. None
When you select this option the SMT will use Address Mapping Set 255
(menu 15.1 - see Section 42.2.1 on page 614). Choose SUA Only if you
have just one public WAN IP address for your ZyWALL.
SUA Only
Menu 15 - NAT Setup
1. Address Mapping Sets
2. Port Forwarding Setup
3. Trigger Port Setup
Enter Menu Selection Number:
Zobrazit stránku 612
1 2 ... 608 609 610 611 612 613 614 615 616 617 618 ... 834 835

Komentáře k této Příručce

Žádné komentáře

Sonos PLAY5BLACK manuály

Uživatelské manuály a uživatelské příručky pro Bridge a opakovače Sonos PLAY5BLACK.
Poskytujeme 1 manuály pdf Sonos PLAY5BLACK ke stažení zdarma podle typů dokumentů: Uživatelský manuál






Další produkty a příručky pro Bridge a opakovače Sonos

Modely Typ Dokumentu
ZoneBridge Uživatelská příručka   Sonos ZoneBridge, 12 stránky