ZyXEL Communications ZYWALL 70 - V4.04 Uživatelská příručka stáhnout pdf (Strana 20)

Condition:

(1) Reset to default romfile.

(2) Go to eWC>FIREWALL>Rule Summary, then insert a new firewall rule.

(3) In eWC>FIREWALL - EDIT RULE, fill in "Rule Name" and select service

"PCAnywhere_Data(TCP5631)" to "Selected Service(s)" column.

(4) Click "Apply".

(5) In eWC>FIREWALL>Rule Summary, you can see the service change to

"Any(TCP)".

10. [BUG FIX] SPR ID: 080221670

Symptom: CI command "ip nat incikeport" had been removed in firmware 4.03.

Condition:

(1) Disable the engineer debug flag by "ATEN".

(2) Execute CI "ip nat incikeport" will fail.

11. [BUG FIX] SPR ID: 080307373

Symptom: OIDs for VPN does not work. Even after tunnel has been up for a while

and traffic has been passed, those OIDs just show 0 in all table.

Condition:

(1) Set up topology:ZW70---internet--VPN--internet-----ZW35(DUT)

(2) Setup an SNMP server (software on PC) on ZW35 WAN subnet.

(3) Add zyxel.mib and zyxel-zywall mib.

(4) Dial up VPN on DUT, generate some traffic through VPN.

(5) From the SNMP server, it's observed that following OIDs are always 0:

vpnTunnelTxPktCnt .1.3.6.1.4.1.890.1.6.1.3.1.1.3

vpnTunnelTxPktSize .1.3.6.1.4.1.890.1.6.1.3.1.1.4

vpnTunnelRxPktCnt .1.3.6.1.4.1.890.1.6.1.3.1.1.5

vpnTunnelRxPktSize .1.3.6.1.4.1.890.1.6.1.3.1.1.6

vpnTunnelDisPktCnt .1.3.6.1.4.1.890.1.6.1.3.1.1.7

vpnTunnelDisPktSize .1.3.6.1.4.1.890.1.6.1.3.1.1.8

12. [BUG FIX] SPR ID: 080313747

Symptom: PC at LAN B can't ping to PC at LAN C.

Condition:

Toplolgy:

10.1.1.21 10.21.10.0/24

|--------(W)ZWB(L)---PC1

---(W)ZWA(L)-------|

10.1.1.2 |--------(W)ZWC(DUT)(L)---PC2

10.1.1.9 10.10.10.0/24

(1) ZWA LAN: 10.1.1.0/24, ZWA as a NAT router

ZWB WAN: 10.1.1.21 LAN:10.21.10.0/24, ZWB as a pure router

ZWC(DUT) WAN: 10.1.1.9 LAN:10.10.10.0/24, ZWC as a pure router

On ZWA goto eWC>SECRITY>FIREWALL

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 111 112

Žádné komentáře

ZyXEL Communications ZYWALL 70 - V4.04 Uživatelská příručka Strana 20