ZyXEL Communications Prestige 642M series Uživatelská příručka stáhnout pdf (Strana 85)

Prestige 642 ADSL Internet Access Router

5-8 Remote Node TCP/IP Configuration

Address your Prestige that will forward the packet to the destination. On the LAN, the

gateway must be a router on the same segment as your Prestige; over WAN,

the gateway must be the IP address of one of the remote nodes.

Metric The metric represents the “cost” of transmission for routing purposes. IP

routing uses hop count as the measurement of cost, with a minimum of 1 for

directly connected networks. Enter a number that approximates the cost for

this link. The number need not be precise, but it must be between 1 and 15. In

practice, 2 or 3 is usually a good number.

Private This parameter determines if the Prestige will include the route to this remote

node in its RIP broadcasts. If set to

Yes

, this route is kept private and not

included in RIP broadcast. If

, the route to this remote node will be

propagated to other hosts through RIP broadcasts.

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 154 155

Žádné komentáře

ZyXEL Communications Prestige 642M series Uživatelská příručka Strana 85