ZyXEL Communications Prestige 642M series Uživatelská příručka stáhnout pdf (Strana 111)

Prestige 642 ADSL Internet Access Router

2-4 Hardware Installation & Setup

Step 1.

Connect a phone cable from the wall jack to the single jack end of the Y- Connector.

Step 2.

Connect a cable from the double jack end of the Y-Connector to the “wall side” of the

microfilter.

Step 3.

Connect another cable from the double jack end of the Y-Connector to the Prestige.

Step 4.

Connect the “phone side” of the microfilter to your telephone as shown in the following figure.

Figure 2-4 Connecting the Microfilter

2.6 Power Up Your Prestige

At this point, you should have connected the console port, the ADSL line, the Ethernet port and the power

port to the appropriate devices or lines. You can now apply power to the Prestige by turning the switch on.

Step 1. Initial Screen

When you power on your Prestige, it performs several internal tests as well as line initialization. After the

initialization, the Prestige asks you to press

ENTER

to continue, as shown.

Figure 2-5 Power-On Display

Step 2. Entering Password

The login screen appears after you press ENTER, prompting you to enter the password, as shown below.

initialize ch =0, ethernet address: 00:a0:c5:01:23:45

HWSAR (FPGA) : programming (11969) ... done

HWSAR (FPGA) : testing ... done

Wan Channel init ........ done

Loading ADSL modem F/W

............................................... done

Press ENTER to continue...

Wall

Jack

Prestige

Y -CONNECTOR

Wall

Side

Phone

Side

Microfilter

1 2 ... 106 107 108 109 110 111 112 113 114 115 116 ... 154 155

Žádné komentáře

ZyXEL Communications Prestige 642M series Uživatelská příručka Strana 111