
keep_alive <rule #> <on|off> Set ipsec keep_alive flag
load <rule #>
Load ipsec rule
save
Save ipsec rules
config netbios active <on|off> Set netbios active flag
group <group index1, group
index2…>
Set netbios group
name <string> Set rule name
name <string> Set rule name
keeyAlive <Yes| No> Set keep alive or not
lcIdType <0:IP | 1:DNS | 2:Email> Set local ID type
lcIdContent <string> Set local ID content
myIpAddr <IP address> Set my IP address
peerIdType <0:IP | 1:DNS | 2:Email> Set peer ID type
peerIdContent <string> Set peer ID content
secureGwAddr <IP address | Domain name> Set secure gateway address or
domain name
protocol <1:ICMP | 6:TCP | 17:UDP> Set protocol
lcAddrType <0:single | 1:range | 2:subnet> Set local address type
lcAddrStart <IP> Set local start address
lcAddrEndMask <IP> Set local end address or mask
lcPortStart <port> Set local start port
Komentáře k této Příručce