ZyXEL Communications G-3000H Uživatelský manuál

ZyAIR G-3000H Support NotesZyAIR G-3000H Support NotesLast Update: July 15, 2005 FAQ- ZyNOS FAQ- Product FAQ- Wireless FAQApplication Notes-Ad hoc Mod

ZyAIR FAQ5. TTLS6. LEAP7. PEAP11. How does the ZyAIR support TFTP and FTP?In addition to the direct console port connection, the Prestige supports

IEEE 802.1x Access Control4. choose Network option.5. Add a new wireless profile.file:///D|/work%20info/Support%20Note/ZyAIR_G3000H/app/8021x.htm (21

IEEE 802.1x Access Control6. Type the Profile Name and Network Name (SSID) in the field.7. Click Next button. file:///D|/work%20info/Support%20Note/Zy

IEEE 802.1x Access Control8. Select WPA-PSK from the Network Authentication field.9. Select TKIP from the Data Encryption field.10. Type the Pre Share

IEEE 802.1x Access Control12. After you finished the profile settings, choose the profile you configured. Then, click Connect button to associate with

IEEE 802.1x Access Control13. Click the General option, we will see the following information, that means the PC associated and authenticated with AP

IEEE 802.1x Access Control file:///D|/work%20info/Support%20Note/ZyAIR_G3000H/app/8021x.htm (26 of 27)2005/7/15 下午 02:14:56

IEEE 802.1x Access Control file:///D|/work%20info/Support%20Note/ZyAIR_G3000H/app/8021x.htm (27 of 27)2005/7/15 下午 02:14:56

Setup 802.1x client in the stationSetup 802.1x client in the station● Setup Windows XP 802.1x client ● Setup MeetingHouse AEGIS 802.1x client

Setup 802.1x client in the station 4. In Authentication tab, check Enable network access control using IEEE 8021.x and choose the MD5-Challenge in the

Setup 802.1x client in the station5. Connect to ZyXEL AP, in Wireless Network Connection, choose View Available Wireless Networksfile:///D|/work%20inf

Wireless FAQWireless FAQ General FAQ 1. What is a Wireless LAN ? 2. What are the main advantages of Wireless LANs ? 3. What are the disadvantages o

Setup 802.1x client in the station6. In the Connect to Wireless Network window, select the AP you would like to connect in the Available networks fiel

Setup 802.1x client in the station7. Windows XP will show you the message "Click here to enter your user name and password for the network <AP

Setup 802.1x client in the station9. Windows XP completes the negotiation and changes the status for you automatically as shown on following figure.●

Setup 802.1x client in the station1. Please connect your wireless client to AP before configuring AEGIS 802.1x client.2. Open AEGIS Client- Running wi

Setup 802.1x client in the stationfile:///D|/work%20info/Support%20Note/ZyAIR_G3000H/app/8021x_client.htm (8 of 10)2005/7/15 下午 02:14:57

Setup 802.1x client in the station3. Right click the specified wireless client adapter in the AEGIS Client --> Select Start to start the 802.1x aut

Setup 802.1x client in the station5. If AEGIS 802.1x client does not start to negotiate with wireless AP, please perform Step 1 again.file:///D|/work%

CI_commandI Command List Command Class List Table System Related Command Exit C

CI_command feature display feature bit hostname [hostname] display system hostname log clear clear log error disp d

CI_command wdog switch [on|off] set on/off wdog cnt [value] display watchdog counts value: 0-34463 romreset restore defa

Wireless FAQ Security FAQ1. How do I secure the data across an Access Point's radio link? 2. What is WEP ? 3. What is the difference between 4

CI_command version see ethernet device type edit load <ether no.> load ether data from spt save save ether data to

CI_commandCommand Description ip address [addr] display host ip address arp status <iface> display ip arp stat

CI_command drop <host addr> [/<bits>] drop a route status display ip statistic counters udp status display u

CI_commandCommand Description 8021x radius authentication Show show current radius authentication server configuration accountin

Wireless TroubleshootingWireless Troubleshooting● Is it a hardware problem● How can I check to be sure if I am interfered or not● If I&apo

Wireless TroubleshootingChange the location and choose other radio channel to see whether the impact of the interference decreases and the link qualit

Wireless TroubleshootingUnable to authenticate to the access pointIf your client adapter is unable to authenticate to an access point, check the secur

Wireless Troubleshooting[test] [0:a:8a:a2:ae:4e] [login success] [accepted by profiles][test] [0:a:8a:a2:ae:4e] [login fail] [user password error rela

Wireless TroubleshootingUnable to get an IP address via DHCP1. Verify that the DHCP server service is running.2. The other wired clients on the same

Wireless FAQInstalling a wireless LAN system can be fast and easy and can eliminate the need to pull cable through walls and ceilings. c. Installation

Wireless FAQband. Also known as 802.11 High-Rate and Wi-Fi. 802.11b only uses DSSS, the maximum speed of 11Mbps has fallbacks to 5.5, 2 and 1Mbps. 8.

Wireless FAQ14. Does the 802.11 interfere with Bluetooth devices ?Any time devices are operated in the same frequency band, there is the potential for

Wireless FAQor any connection to a wired network.2. What is Infrastructure mode ?Infrastructure mode implies connectivity to a wired communications in

Wireless FAQ9. What is an ESSID ? ESSID stands for Extended Service Set Identifier and identifies the wireless LAN. The ESSID of the mobile device mus

Wireless FAQbroadcast beacon packets. Turning off the broadcast of SSID in the beacon message (a common practice) does not prevent getting the SSID; s

Wireless FAQ13. What is AAA ?AAA is the acronym for Authentication, Authorization, and Accounting and refers to the idea of managing subscribers by co

ZyNOS General FAQZyNOS FAQ 1. What is ZyNOS? 2. How do I access the embeded web configurator? 3. What is the default username and password? Moreov

AdhocConfigure a Wireless Client to Ad hoc mode ● Ad hoc Introduction ● Configuration for wireless station A ● Configuration for wireles

Adhoc1. Double click on the utility icon in your windows task bar the utility will pop up on your windows screen.2. Select configuration tab.3. Select

Adhoc5. From general tab select TCP/IP and click propertyfile:///D|/work%20info/Support%20Note/ZyAIR_G3000H/app/Adhoc.htm (3 of 7)2005/7/15 下午 02:14:4

Adhoc6. Fill in your network IP address and subnet mask and click OK to finish.● Configuration for Wireless Station BTo configure Ad hoc mode on

Adhoc3. Select Ad hoc from the operation mode pull down menu, fill you an SSID and select a channel you want to use than press OK to apply.4. Since th

Adhoc5. From general tab select TCP/IP and click propertyfile:///D|/work%20info/Support%20Note/ZyAIR_G3000H/app/Adhoc.htm (6 of 7)2005/7/15 下午 02:14:4

Adhoc6. Fill in your network IP address and subnet mask and click OK to finish.7. Station A now are able to connect to Station B. file:///D|/work%20i

InfrastructureConfiguring Infrastructure mode ● Infrastructure Introduction ● Configure wireless access point to Infrastructure mode with SM

Infrastructure ESSID= Wireless Edit MAC Address Filter= No Hide ESSID= No

Infrastructure3. Configure the desired configuation on ZyAIR.4. Finished.● Configuration Wireless Station to Infrastructure modeTo configure Infra

ZyNOS General FAQThe procedure for uploading ZyNOS via embeded web configurator is as follows. a. Log on into the web configurator b. Press "MA

Infrastructure1. Double click on the utility icon in your windows task bar the utility will pop up on your windows screen.2. Select configuration tab.

Infrastructure5. Double click on the AP you want to associated with.6. After the client have associated with the selected AP. The linked AP's ch

InfrastructureMode.file:///D|/work%20info/Support%20Note/ZyAIR_G3000H/app/Infrastructure.htm (6 of 6)2005/7/15 下午 02:14:44

MAC FilterMAC Filter ● MAC Filter Overview ● ZyXEL MAC Filter Implementation ● Configure the WLAN MAC Filter 1. MAC Filter Overview User

MAC Filter Menu 3.5.1 - WLAN MAC Address Filter Active= No Filter Action= Allowed Asso

MAC Filter file:///D|/work%20info/Support%20Note/ZyAIR_G3000H/app/MACfilter.htm (3 of 3)2005/7/15 下午 02:14:45

Wired Equivalent Privacy (WEP)Setup WEP (Wired Equivalent Privacy)● Introduction ● Setting up the Access Point ● Setting up the Station

Wired Equivalent Privacy (WEP)concatenated with the initialisation vector ( 24 bits ) resulting in a 64/128 bit total key size.Setting up the Access P

Wired Equivalent Privacy (WEP)❍ 64-bit WEP key (secret key) with 5 characters ❍ 64-bit WEP key (secret key) with 10 hexadecimal digits ❍

Wired Equivalent Privacy (WEP)WEP Key type Example64-bit WEP with 5 characters Key1= 2e3f4 Key2= 5y7jsKey3= 24fg7Key4= 98jui 64-bit WEP with 10 hexade

ZyNOS General FAQc. Press "Configuration" from the left menu.d. Press "Restore" tab and press browse button point to the directo

Wired Equivalent Privacy (WEP)file:///D|/work%20info/Support%20Note/ZyAIR_G3000H/app/WEP.htm (5 of 9)2005/7/15 下午 02:14:48

Wired Equivalent Privacy (WEP)Key settings Select one WEP key as default key to encrypt wireless data transmission.Setting up the Station 1. Double c

Wired Equivalent Privacy (WEP) Note: If the utility icon doesn't exist in your task bar, click Start -> Programs -> IEEE802.11b WLAN Card

Wired Equivalent Privacy (WEP) Key settings The WEP Encryption type of station has to equal to the access point. Check 'ASCII' field f

Wired Equivalent Privacy (WEP)Key4= 456789ABCD file:///D|/work%20info/Support%20Note/ZyAIR_G3000H/app/WEP.htm (9 of 9)2005/7/15 下午 02:14:48

RoamingConfigure Access Point for Roaming ● Introduction ● Configure Access Point 1 for roaming using SMT ● Configure Access Point 2 for

Roaming● Configuration AP1 for Roaming using SMTTo Enable the roaming feature if you have two or more ZyAIRs on the same subnet. Follow the steps

Roaming　　● Configuration AP2 for Roaming using SMTTo Enable the roaming feature if you have two or more ZyAIRs on the same subnet. Follow the step

Roaming Menu 3.5.2 - Roaming Configuration Active= Yes Port #= 3517 Press ENTER to Confirm or ESC to Cancel:　field d

Roaming2. Select 'Yes' from the pull down menu under Roaming configuration and specify the roaming port.3. Upon completion click Apply to ma

ZyAIR FAQProduct FAQ General FAQ 1. What is the ZyAIR Wireless Access Point?2. Which Applications can I use with the ZyAIR?3. What is the coverage

Roaming　2. Select 'Yes' from the pull down menu under Roaming configuration and specify the roaming port.3. Upon completion click Apply to m

Roaming1. All the access points and wireless stations must be on the same subnet, configured with the same ESSID and security settings such as WEP. 2

Site surveySite Survey ● Site survey introduction ● Preparation ● Survey on site ● IntroductionWhat is Site Survey?An RF site survey

Site survey2. Install an access point at the preliminary location. 3. User a notebook with wireless client installed and run it's utility. An ut

Site survey5. When you reach the farthest point of connection mark the spot. Now you move the access point to this new spot as have already determine

Site surveyNote: If there are more than one access point is needed be sure to make the adjacent access point service area over lap one another. So th

WDSConfigure Access Point as a Multiple WDS( Wireless Distribution System ) bridge/repeater mode● Multiple WDS Introduction ● Configuration fo

WDS● Configuration for Wireless Station 1The ZyAIR can function as wireless network bridge allowing you to wirelessly connect up to 6 wired networ

WDSloops.1. Click Advanced and Wireless. 2. Select Bridge/Repeater in the Operation Mode drop-down list box to display the screen as down.3. Type the

WDS● Configuration for Wireless Station 21. Click Advanced and Wireless. 2. Select Bridge/Repeater in the Operation Mode drop-down list box to dis

ZyAIR FAQ1. What is the ZyAIR Wireless Access Point?The ZyAIR is a wireless access point solution complete with everything needed for providing high s

WDS ● Configuration for Wireless Station 31. Click Advanced and Wireless. 2. Select Bridge/Repeater in the Operation Mode drop-down list box to di

WDS3. Type the MAC address of peer device in the Remote Bridge MAC Address field, that is, six hexadecimal character pairs.4. Check 'Enable Spann

WDS● Configuration for Wireless Station 41. Click Advanced and Wireless. 2. Select Bridge/Repeater in the Operation Mode drop-down list box to dis

WDS ● Configuration for Wireless Station 51. Click Advanced and Wireless. 2. Select Bridge/Repeater in the Operation Mode drop-down list box to di

WDSfile:///D|/work%20info/Support%20Note/ZyAIR_G3000H/app/WDS%20Bridge.htm (9 of 12)2005/7/15 下午 02:14:51

WDS● Configuration for Wireless Station 61. Click Advanced and Wireless. 2. Select Bridge/Repeater in the Operation Mode drop-down list box to dis

WDS ● Configuration for Wireless Station 71. Click Advanced and Wireless. 2. Select Bridge/Repeater in the Operation Mode drop-down list box to di

WDSfile:///D|/work%20info/Support%20Note/ZyAIR_G3000H/app/WDS%20Bridge.htm (12 of 12)2005/7/15 下午 02:14:51

Repeater mdoeConfigure Access Point as a Repeater mode● Repeater Introduction ● Configuration for wireless station 1 ● Configuration for w

Repeater mdoeThe repeater mode is the bridge mode without the Ethernet connection. When the ZyAIR is in the bridge/repeater mode, you need to enable S

ZyAIR FAQThe procedures to reset the unit is as follow1. Used a sharp pointed object insert it into the little reset hole beside the power connector.

Repeater mdoe● Configuration for Wireless Station 21. Click Advanced and Wireless. 2. Select Bridge/Repeater in the Operation Mode drop-down list

Repeater mdoe ● Configuration for Wireless Station 3file:///D|/work%20info/Support%20Note/ZyAIR_G3000H/app/Repeater%20mode.htm (4 of 6)2005/7/15 下

Repeater mdoe1. Click Advanced and Wireless. 2. Select Bridge/Repeater in the Operation Mode drop-down list box to display the screen as down.3. Type

Repeater mdoe file:///D|/work%20info/Support%20Note/ZyAIR_G3000H/app/Repeater%20mode.htm (6 of 6)2005/7/15 下午 02:14:52

file:///D|/work%20info/Support%20Note/ZyAIR_G3000H/app/AP+bridge%20mode.htmConfigure Access Point as a AP + bridge/repeater mode● AP + Bridge mode

file:///D|/work%20info/Support%20Note/ZyAIR_G3000H/app/AP+bridge%20mode.htm● Configuration for Wireless Station A1. Click Advanced and Wireless. 2

file:///D|/work%20info/Support%20Note/ZyAIR_G3000H/app/AP+bridge%20mode.htmfile:///D|/work%20info/Support%20Note/ZyAIR_G3000H/app/AP+bridge%20mode.htm

file:///D|/work%20info/Support%20Note/ZyAIR_G3000H/app/AP+bridge%20mode.htm● Configuration for Wireless Station B1. Click Advanced and Wireless. 2

file:///D|/work%20info/Support%20Note/ZyAIR_G3000H/app/AP+bridge%20mode.htmfile:///D|/work%20info/Support%20Note/ZyAIR_G3000H/app/AP+bridge%20mode.htm

file:///D|/work%20info/Support%20Note/ZyAIR_G3000H/app/AP+bridge%20mode.htm file:///D|/work%20info/Support%20Note/ZyAIR_G3000H/app/AP+bridge%20mode.ht

ZyAIR FAQ11. What is the maximum number of wireless client can associated with ZyAIR simultaneously?We did not limit the number of wireless client can

IEEE 802.1x Access ControlSetup IEEE 802.1x Access Control (Authentication and Accounting)● What is IEEE 802.1x ? IEEE 802.1x Introduction

IEEE 802.1x Access ControlIEEE 802.1x authentication is a client-server architecture delivered with EAPOL (Extensible Authentication Protocol over LAN

IEEE 802.1x Access ControlThe device (i.e. RADIUS server) provides an authentication service to an authenticator. This service determines, from the cr

IEEE 802.1x Access Controlreceives normal traffic without 802.1x-based authentication of the client. This is the default port control setting. While A

IEEE 802.1x Access ControlEAPOL Exchange between 802.1x Authenticator and SupplicantThe authenticator or the supplicant can initiate authentication. I

IEEE 802.1x Access ControlThe EAPOL packet contains the following fields: protocol version, packet type, packet body length and packet body. Most of t

IEEE 802.1x Access ControlEnter SMT Menu 23.4 to setup the 802.1x authentication control. Menu 23.4 - S

IEEE 802.1x Access Control1. From the Web Configurator main menu, go to Main Menu->WIRELESS->802.1x/WPA.2. In the Wireless Port Control, selec

IEEE 802.1x Access Control Menu 14 - Dial-in User Setup 1. support 9. ________ 17. ________ 25. ______

IEEE 802.1x Access Control● Using External RADIUS Authentication ServerIn addition to the internal authentication server inside ZyXEL AP, you can

ZyAIR FAQOpen System:The default authentication service that simply announces the desire to associate with another station or access point. A station

IEEE 802.1x Access ControlWhen the client supplies its identity, the authenticator begins its role as the intermediary, passing EAP frames between the

IEEE 802.1x Access Control1. From the SMT main menu, enter Menu 23.2 to setup System Security - RADIUS Server to setup the External RADIUS authenticat

IEEE 802.1x Access Control Menu 23.2 - System Security - RADIUS Server Authentication Server:

IEEE 802.1x Access Controlfile:///D|/work%20info/Support%20Note/ZyAIR_G3000H/app/8021x.htm (14 of 27)2005/7/15 下午 02:14:56

IEEE 802.1x Access Control Key settings for External Authentication Server:Field DescriptionExternal RADIUS Server Select the radio button to use an E

IEEE 802.1x Access ControlShared SecretType a password (up to 31 alphanumeric characters) as the key to be shared between the external authentication

IEEE 802.1x Access ControlActivePress [SPACE BAR] to select Yes and press [Enter] to enable 802.1x user authentication through an external RADIUS auth

IEEE 802.1x Access ControlWhat is WPA Functionality?Wi-Fi Protected Access (WPA) is a subset of the IEEE 802.11i security specification draft. Key dif

IEEE 802.1x Access Control● Configuration for Access pointThe IEEE 802.1x standard outlines enhanced security methods for both the authentication

IEEE 802.1x Access Control● Configuration for your PC1. Double click on your wireless utility icon(here is the Centrion on Windows XP) in your win