ZyXEL Communications NBG-510S Uživatelská příručka Strana 67

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 210
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 66
Chapter 7 Wireless LAN
NBG-510S User’s Guide
67
The following table describes the labels in this screen.
7.3.4 WPA/WPA2
Click Network > Wireless LAN to display the following screen.
Figure 48 Network > Wireless LAN: WPA/WPA2
Table 10 Network > Wireless LAN: WPA-PSK/WPA2-PSK
LABEL DESCRIPTION
WPA Compatible This check box is available only when you select WPA2-PSK or WPA2 in the
Server Type field.
Select the check box to have both WPA2 and WPA wireless clients be able to
communicate with the ZyXEL Device even when the ZyXEL Device is using
WPA2-PSK or WPA2.
Pre-Shared Key The encryption mechanisms used for WPA/WPA2 and WPA-PSK/WPA2-PSK
are the same. The only difference between the two is that WPA-PSK/WPA2-PSK
uses a simple common password, instead of user-specific credentials.
Type a pre-shared key from 8 to 63 case-sensitive ASCII characters (including
spaces and symbols). A minimum of 20 characters consisting of letters, upper and
lower case, numbers and symbols is recommended.
Apply Click Apply to save your changes back to the ZyXEL Device.
Cancel Click Cancel to begin configuring this screen afresh.
Zobrazit stránku 66
1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 209 210

Komentáře k této Příručce

Žádné komentáře