Zyxel-communications Internet Security Gateway ZyWALL 2 Series Uživatelský manuál Strana 375

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 614
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 374
ZyWALL 2 Series User’s Guide
WAN and Dial Backup Setup 23-9
23.7 Editing TCP/IP Options
Move the cursor to the Edit IP field in menu 11.1, then press [SPACE BAR] to select Yes. Press [ENTER]
to open Menu 11.3 - Remote Node Network Layer Options.
Figure 23-7 Menu 11.3: Remote Node Network Layer Options
The following table describes the fields in this menu.
Table 23-6 Menu 11.3: Remote Node Network Layer Options
FIELD DESCRIPTION EXAMPLE
Rem IP
Address
Leave this field set to 0.0.0.0 to have the ISP or other remote router
dynamically (automatically) send its IP address if you do not know it. Enter
the remote gateway’s IP address here if you know it (static).
0.0.0.0
(default)
Rem Subnet
Mask
Leave this field set to 0.0.0.0 to have the ISP or other remote router
dynamically send its subnet mask if you do not know it. Enter the remote
gateway’s subnet mask here if you know it (static).
0.0.0.0
(default)
My WAN
Addr
Leave the field set to 0.0.0.0 to have the ISP or other remote router
dynamically (automatically) assign your WAN IP address if you do not
know it. Enter your WAN IP address here if you know it (static).
This is the address assigned to your local ZyWALL, not the remote router.
0.0.0.0
(default)
Menu 11.3 - Remote Node Network Layer Options
Rem IP Addr= 0.0.0.0
Rem Subnet Mask= 0.0.0.0
My WAN Addr= 0.0.0.0
Network Address Translation= SUA Only
Metric= 15
Private= No
RIP Direction= None
Version= N/A
Multicast= None
Enter here to CONFIRM or ESC to CANCEL:
Zobrazit stránku 374
1 2 ... 370 371 372 373 374 375 376 377 378 379 380 ... 613 614

Komentáře k této Příručce

Žádné komentáře