Zyxel-communications NWA3550 Uživatelský manuál Strana 218

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 344
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 217
Chapter 17 VLAN
NWA3550 User’s Guide
218
17.2.5 Second Rx VLAN ID Example
In this example, the ZyXEL Device is configured to tag packets from SSID01 with VLAN ID
1 and tag packets from SSID02 with VLAN ID 2. VLAN 1 and VLAN 2 have access to a
server, S, and the Internet, as shown in the following figure.
Figure 136 Second Rx VLAN ID Example
Packets sent from the server S back to the switch are tagged with a VLAN ID (incoming
VLAN ID). These incoming VLAN packets are forwarded to the ZyXEL Device. The ZyXEL
Device compares the VLAN ID in the packet header with each SSID’s configured VLAN ID
and second Rx VLAN ID settings.
In this example, SSID01s second Rx VLAN ID is set to 2. All incoming packets tagged with
VLAN ID 2 are forwarded to SSID02, and also to SSID01. However, SSID02 has no second
Rx VLAN ID configured, and the ZyXEL Device forwards only packets tagged with VLAN
ID 2 to it.
17.2.5.1 Second Rx VLAN Setup Example
The following steps show you how to setup a second Rx VLAN ID on the ZyXEL Device.
1 Log into the Web Configurator.
2 Click VLAN > Wireless VLAN.
3 If VLAN is not already enabled, click Enable VIRTUAL LAN and set up the
Management VLAN ID (see Section 17.2.3 on page 207).
" If no devices are in the management VLAN, then no one will be able to access
the ZyXEL Device and you will have to restore the default configuration file.
SSID01
VLAN ID: 1
Second Rx VLAN ID: 2
SSID02
VLAN ID: 2
Second Rx VLAN ID: 0
Internet
S
Zobrazit stránku 217
1 2 ... 213 214 215 216 217 218 219 220 221 222 223 ... 343 344

Komentáře k této Příručce

Žádné komentáře