Zyxel-communications 802.11g Wireless Firewall Router P-320W Uživatelský manuál Strana 119

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 215
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 118
P-320W User’s Guide
Chapter 11 Remote Management Screens 119
CHAPTER 11
Remote Management Screens
This chapter provides information on the Remote Management screens.
11.1 Remote Management Overview
Remote management allows you to determine which services/protocols can access which
Prestige interface (if any) from which computers.
Note: When you configure remote management to allow management from the WAN,
you still need to configure a firewall rule to allow access. See the firewall
chapters for details on configuring firewall rules.
You may manage your Prestige from a remote location via:
LAN only ALL (LAN and WAN)
To disable remote management of a service, select LAN in the corresponding Server Access
field.
11.1.1 Remote Management Limitations
Remote management over LAN or WAN will not work when:
1 You have disabled that service in one of the remote management screens.
2 The IP address in the Secured Client IP field does not match the client IP address. If it
does not match, the Prestige will disconnect the session immediately.
3 There is a firewall rule that blocks it.
11.1.2 Remote Management and NAT
When NAT is enabled:
Use the Prestige’s WAN IP address when configuring from the WAN.
Use the Prestige’s LAN IP address when configuring from the LAN.
Zobrazit stránku 118
1 2 ... 114 115 116 117 118 119 120 121 122 123 124 ... 214 215

Komentáře k této Příručce

Žádné komentáře