ZyXEL Communications Prestige 964 Uživatelská příručka stáhnout pdf (Strana 33)

P964 APR Cable Router with 802.11g Access Point

Web Based Management 3-11

“802.1x”: There must be a RADIUS server when use this setting. 802.11b/g client devices must have a relative setting for this

option. It is also required to set the correct “PassPhrase” on RADIUS server while connecting with P964 APR.

“WPA”: This option has the same requirement to set the RADIUS server. 802.11b/g client devices must support WPA option to

connect with P964 APR.

“WPA-PSK”: The RADIUS server is not required, but the “WPA Pre-Shared Key” must be set. In order to connect with P964

APR, 802.11b/g client devices must support WPA option. The P964 APR also has a “WPA Group Rekey Interval” setting, the

unit is in seconds, It is a function for WPA key changeing periodically by setting the interval.

Click “Apply” to Save all change.

Figure 3-11 Web Management – Wireless: Security

The “802.11b/g Access Control” allows user to configure the Access Control of the AP and the connected clients.

“MAC Restrict Mode”: The restrict mode can be set as ‘Allow’ or ‘Deny’ to allow or deny access client to connect the P964 APR.

Choose ‘Disabled’ without any restrictions.

“MAC Addresses”: MAC Addresses to ‘Deny’ or ‘Allow’

Click “Apply” to Save all change.

“Connected Clients”: Show the current connecting CPEs.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 50 51

Žádné komentáře

ZyXEL Communications Prestige 964 Uživatelská příručka Strana 33