ZyXEL Communications G-570U Uživatelská příručka stáhnout pdf (Strana 65)

ZyXEL G-570U User’s Guide

Chapter 6 Wireless Screens 65

6.3.3 Bridge Mode

The device can act as a wireless network bridge and establish wireless links with other APs.

You need to know the MAC address of the peer device, which also must be in bridge mode.

When two devices connect in Bridge mode, they form a WDS (Wireless Distribution System)

allowing the computers in one LAN to connect to the computers in another LAN. See the

following example.

Note: WPA, WPA2 and IEEE 802.1x wireless security are not available when you use

Wireless Client, Bridge or AP+Repeater mode.

You can only use WEP keys to encrypt traffic between APs.

Figure 38 Bridging Example

Be careful to avoid bridge loops when you enable bridging in the G-570U. Bridge loops cause

broadcast traffic to circle the network endlessly, resulting in possible throughput degradation

and disruption of communications. The following examples show two network topologies that

can lead to this problem:

If two or more G-570Us (in bridge mode) are connected to the same hub as shown next.

RTS/CTS

Threshold

Enter a value between 0 and 2346. The default is 2346.

Fragmentation Enter a value between 256 and 2346. The default is 2346. It is the maximum data

fragment size that can be sent.

Apply Click Apply to save your changes back to the device.

Reset Click Reset to begin configuring this screen afresh.

Table 12 Wireless Settings: Wireless Client (continued)

LABEL DESCRIPTION

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 161 162

Žádné komentáře

ZyXEL Communications G-570U Uživatelská příručka Strana 65