ZyXEL Communications ZYWALL 5 - V4.04 Uživatelský manuál stáhnout pdf (Strana 3)

3/76

www.zyxel.com

File name: 300BDS4C0-enterprise.mib, 300BDS4C0-private.mib

Purpose: The Enterprise and Private MIBs are to collect information about CPU and memory

usage and VPN total throughput. The focus of the MIBs is to let administrators collect statistical

data and monitor status and performance.

File name: firmware.xml

Purpose: This file is needed by ZyXEL Centralized Network Management (CNM) 3.0 or after.

File name: 300BDS4C0-opensource-list.xls

Purpose: This file lists the open source packages.

Read Me First

1. The system default configuration is summarized as below:

 The default device administration username is “admin”, password is “1234”.

 The default LAN interface is lan1, which are P3 and P4 ports on the front panel. The

default IP address of lan1 is 192.168.1.1/24.

 By default, WWW/SSH/SNMP service can only be accessed from LAN subnet.

 The default WAN interface is wan1, and the secondary WAN interface is wan2. These

two interfaces will automatically get IP address using DHCP by default.

2. It is recommended that user backup the “startup-config.conf ” file first before upgrading

firmware. The backup configuration file can be used if user wants to downgrade to an older

firmware version.

3. If user upgrades from previous released firmware to this version, there is no need to restore to

system default configuration.

4. After upgrade firmware, please remember to clear browser cache to avoid the GUI cache issue.

5. If it is difficult to configure via GUI (popup java script error, etc). It is recommended to logout

the configuration window and clear browser cache first, then try to login and configure again.

6. To reset device to system default, user can press RESET button for 5 seconds and the device

will reset itself to system default configuration then reboot automatically.

 Note 1: After resetting, the original configuration will be removed. It is recommended to

backup the configuration before performing this operation.

 Note 2: After resetting, if user has subscribed to security licenses, user needs to connect

to internet with myZyXEL.com and refresh license information.

7. If there is problem to reboot successfully after firmware upgrade, please refer to Appendix 3:

Firmware Recovery.

1 2 3 4 5 6 7 8 ... 75 76

Žádné komentáře

ZyXEL Communications ZYWALL 5 - V4.04 Uživatelský manuál Strana 3