ZyXEL Communications Parental Control Gateway HS100/HS100W Uživatelská příručka

Procházejte online nebo si stáhněte Uživatelská příručka pro Sítě ZyXEL Communications Parental Control Gateway HS100/HS100W. ZyXEL Communications Parental Control Gateway HS100/HS100W User`s guide Uživatelská příručka

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 357
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků

Shrnutí obsahu

Strany 1 - HS-100 / HS-100W

HS-100 / HS-100W Parental Control Gateway User’s Guide Version 3.62 10/2005

Strany 2 - Copyright

HomeSafe User’s Guide x Table of Contents SMT General Configuration...

Strany 3 - (FCC) Interference Statement

HomeSafe User’s Guide Wireless Security 7-7 Temporal Key Integrity Protocol (TKIP) uses 128-bit keys that are dynamically generated and distributed

Strany 4 - Caution

HomeSafe User’s Guide 7-8 Wireless Security 7.6 Configuring WPA-PSK Authentication In order to configure and enable WPA-PSK Authentication; click

Strany 5 - ZyXEL Limited Warranty

HomeSafe User’s Guide Wireless Security 7-9 Table 7-4 WLAN : Wireless : WPA-PSK LABEL DESCRIPTION WPA Group Key Update Timer The WPA Group Key Upda

Strany 6 - Customer Support

HomeSafe User’s Guide 7-10 Wireless Security generate unique data encryption keys to encrypt every data packet that is wirelessly communicated betwe

Strany 7 - Table of Contents

HomeSafe User’s Guide Wireless Security 7-11 Table 7-5 WLAN : Wireless : WPA LABEL DESCRIPTION ReAuthentication Timer (in seconds) Specify how ofte

Strany 8

HomeSafe User’s Guide 7-12 Wireless Security 7.10 Dynamic WEP Key Exchange The AP maps a unique key that is generated with the RADIUS server. This

Strany 9

HomeSafe User’s Guide Wireless Security 7-13 Table 7-6 WLAN : Wireless : 802.1x and Dynamic WEP LABEL DESCRIPTION ReAuthentication Timer (in second

Strany 10

HomeSafe User’s Guide 7-14 Wireless Security Figure 7-10 WLAN : Wireless : 802.1x and Static WEP The following table describes the labels in this s

Strany 11

HomeSafe User’s Guide Wireless Security 7-15 Table 7-7 WLAN : Wireless : 802.1x and Static WEP LABEL DESCRIPTION ReAuthentication Timer (in seconds

Strany 12

HomeSafe User’s Guide 7-16 Wireless Security Table 7-7 WLAN : Wireless : 802.1x and Static WEP LABEL DESCRIPTION Reset Click Reset to reload the pre

Strany 13 - List of Figures

HomeSafe User’s Guide Table of Contents xi 27.1 Introduction to Filters...

Strany 14

HomeSafe User’s Guide Wireless Security 7-17 Table 7-8 WLAN : Wireless: 802.1x LABEL DESCRIPTION Authentication Databases The authentication databa

Strany 15 - List of Figures xv

HomeSafe User’s Guide 7-18 Wireless Security Figure 7-12 WLAN : MAC Address Filter The following table describes the labels in this menu. Table 7-9

Strany 16

HomeSafe User’s Guide Wireless Security 7-19 7.15 Introduction to Local User Database By storing user profiles locally on the HomeSafe, your HomeS

Strany 17 - List of Figures xvii

HomeSafe User’s Guide 7-20 Wireless Security Table 7-10 WLAN : Local User Database LABEL DESCRIPTION User Name Enter the username (up to 31 charact

Strany 18

HomeSafe User’s Guide Wireless Security 7-21 7.17.1 EAP Authentication Overview EAP (Extensible Authentication Protocol) is an authentication proto

Strany 19 - List of Tables

HomeSafe User’s Guide 7-22 Wireless Security Figure 7-15 WLAN : RADIUS The following table describes the labels in this screen. Table 7-11 WLAN :

Strany 20

HomeSafe User’s Guide Wireless Security 7-23 Table 7-11 WLAN : RADIUS LABEL DESCRIPTION Reset Click Reset to reload the previous configuration for

Strany 22

HomeSafe User’s Guide WAN 8-1 Chapter 8 WAN Screens This chapter describes how to configure WAN settings. 8.1 WAN Overview See the Wizard Setup chap

Strany 23 - Preface

HomeSafe User’s Guide 8-2 WAN Table 8-1 WAN : Route LABEL DESCRIPTION WAN Traffic Redirect The default WAN connection is "1' as your broa

Strany 25 - Preface xxv

HomeSafe User’s Guide WAN 8-3 Table 8-2 WAN ISP : Ethernet Encapsulation LABEL DESCRIPTION Login Server This field only applies when you select Tel

Strany 26 - Getting Started

HomeSafe User’s Guide 8-4 WAN Figure 8-3 WAN ISP : PPPoE Encapsulation The following table describes the labels in this screen. Table 8-3 WAN ISP :

Strany 27

HomeSafe User’s Guide WAN 8-5 PPTP supports on-demand, multi-protocol and virtual private networking over public networks, such as the Internet. The

Strany 28 - Chapter 1

HomeSafe User’s Guide 8-6 WAN Table 8-4 WAN ISP : PPTP Encapsulation LABEL DESCRIPTION My IP Subnet Mask Your HomeSafe will automatically calculate

Strany 29 - Table 1-1 IEEE 802.11b

HomeSafe User’s Guide WAN 8-7 Table 8-5 WAN : IP LABEL DESCRIPTION My WAN IP Address Enter your WAN IP address in this field if you selected Use Fi

Strany 30 - Table 1-2 IEEE 802.11g

HomeSafe User’s Guide 8-8 WAN Table 8-5 WAN : IP LABEL DESCRIPTION RIP Version The RIP Version field controls the format and the broadcasting metho

Strany 31

HomeSafe User’s Guide WAN 8-9 The MAC address screen allows users to configure the WAN port's MAC address by either using the factory default o

Strany 32

HomeSafe User’s Guide 8-10 WAN 8.8 Configuring Traffic Redirect To change your HomeSafe’s Traffic Redirect settings, click WAN, then the Traffic Re

Strany 33

HomeSafe User’s Guide WAN 8-11 Table 8-6 WAN : Traffic Redirect LABEL DESCRIPTION Apply Click Apply to save your changes back to the HomeSafe. R

Strany 34 - Chapter 2

SUA/NAT and Static Route III PPaarrtt IIIIII:: SUA/NAT and Static Route This part covers Network Address Translation and setting up static

Strany 35 - 2.4 Step 2 : WLAN Setup

HomeSafe User’s Guide List of Figures xiii List of Figures Figure 1-1 Secure Internet Access via Cable, DSL or Wireless Modem ...

Strany 37

HomeSafe User’s Guide NAT Screens 9-1 Chapter 9 Network Address Translation (NAT) Screens This chapter discusses how to configure NAT on th

Strany 38

HomeSafe User’s Guide 9-2 NAT Screens (for Many-to-One and Many-to-Many Overload mapping), NAT offers the additional benefit of firewall pro

Strany 39

HomeSafe User’s Guide NAT Screens 9-3 Figure 9-2 NAT Application With IP Alias 9.1.5 NAT Mapping Types NAT supports five types of IP/po

Strany 40

HomeSafe User’s Guide 9-4 NAT Screens Table 9-2 NAT Mapping Types TYPE IP MAPPING SMT ABBREVIATION One-to-One ILA1ÅÆ IGA1 1-1 Many-to-One (

Strany 41

HomeSafe User’s Guide NAT Screens 9-5 Default Server IP Address In addition to the servers for specified services, NAT supports a default s

Strany 42

HomeSafe User’s Guide 9-6 NAT Screens 9.3.2 Configuring Servers Behind SUA (Example) Let's say you want to assign ports 21-25 to one FT

Strany 43

HomeSafe User’s Guide NAT Screens 9-7 Figure 9-4 SUA/NAT Setup The following table describes the labels in this screen. Table 9-4 SUA/NAT

Strany 44

HomeSafe User’s Guide 9-8 NAT Screens set summary screen, the new rule will be rule 7, not 9. Now if you delete rule 4, rules 5 to 7 will be

Strany 45

HomeSafe User’s Guide NAT Screens 9-9 Configuring Address Mapping To edit an address mapping rule, select the radio button of a rule and c

Strany 46

HomeSafe User’s Guide xiv List of Figures Figure 4-2 SYSTEM : DDNS...

Strany 47

HomeSafe User’s Guide 9-10 NAT Screens service (coming in from the server on the WAN) to the IP address of a computer on the client side (LA

Strany 48

HomeSafe User’s Guide NAT Screens 9-11 ) Only one LAN computer can use a trigger port (range) at a time. Figure 9-8 Trigger Port The fol

Strany 50

HomeSafe User’s Guide NAT Screens 10-1 Chapter 10 Static Route Screens This chapter shows you how to configure static routes for your Home

Strany 51

HomeSafe User’s Guide 10-2 NAT Screens Table 10-1 Static Route LABEL DESCRIPTION # Number of an individual static route. Name Name that d

Strany 52

HomeSafe User’s Guide NAT Screens 10-3 Table 10-2 Static Route: Edit LABEL DESCRIPTION Metric Metric represents the “cost” of transmission

Strany 53

UPnP, Parental Control and Firewall IV PPaarrtt IIVV:: UPnP, Parental Control and Firewall This part provides information and configuration

Strany 54 - 2.11 HomeSafe Main Menu

HomeSafe User’s Guide UPnP 11-1 Chapter 11 UPnP This chapter introduces the Universal Plug and Play feature. 11.1 Universal Plug and Play Overview

Strany 55 - Table 2-17 Screens Summary

HomeSafe User’s Guide 11-2 UPnP Gateway Device). At the time of writing ZyXEL's UPnP implementation supports Windows Messenger 4.6 and 4.7 while

Strany 56

HomeSafe User’s Guide UPnP 11-3 11.4.1 Installing UPnP in Windows Me Follow the steps below to install UPnP in Windows Me. Step 1. Click Start and

Strany 57

HomeSafe User’s Guide List of Figures xv Figure 9-7 Trigger Port Forwarding Process: Example...

Strany 58 - Connection Wizard

HomeSafe User’s Guide 11-4 UPnP Step 4. Select Networking Service in the Components selection box and click Details. Step 5. In the Networking S

Strany 59

HomeSafe User’s Guide UPnP 11-5 Step 3. In the Internet Connection Properties window, click Settings to see the port mappings that were automatical

Strany 60

HomeSafe User’s Guide 11-6 UPnP Step 6. Double-click the icon to display your current Internet connection status. 11.5.2 Web Configurator Easy Acce

Strany 61 - 3.5.1 Ethernet

HomeSafe User’s Guide UPnP 11-7 Step 6. Right-click the icon for your ZyXEL device and select Properties. A properties window displays with basic i

Strany 63

HomeSafe User’s Guide Parental Control 12-1 Chapter 12 Parental Control This chapter gives some background information on parental control and expl

Strany 64 - 3.5.3 PPTP Encapsulation

HomeSafe User’s Guide 12-2 Parental Control Figure 12-2 User Status Window 4. You can start browsing the web from the current window, or use the lin

Strany 65

HomeSafe User’s Guide Parental Control 12-3 Figure 12-3 HomeSafe Parental Control Wireless Gateway Application 12.4 Configuring Parent

Strany 66 - 3.6.4 WAN MAC Address

HomeSafe User’s Guide 12-4 Parental Control Figure 12-4 Parental Control The following table describes the labels in this screen. Table 12-1 Parenta

Strany 67

HomeSafe User’s Guide Parental Control 12-5 Table 12-1 Parental Control LABEL DESCRIPTION Group Select from the drop-down list box a category of

Strany 68 - 3.7 Basic Setup Complete

HomeSafe User’s Guide xvi List of Figures Figure 17-3 SMT Main Menu ...

Strany 69

HomeSafe User’s Guide 12-6 Parental Control Table 12-1 Parental Control LABEL DESCRIPTION Reset Click Reset to start configuring this screen again

Strany 70

HomeSafe User’s Guide Parental Control 12-7 3. The HomeSafe either blocks or forwards the request based on the services you select in the Availabl

Strany 71

HomeSafe User’s Guide 12-8 Parental Control Figure 12-6 Parental Control : Filter The following table describes the labels in this screen. Table 12

Strany 72 - System Screens

HomeSafe User’s Guide Parental Control 12-9 Table 12-3 Parental Control : Filter LABEL DESCRIPTION Sex Education Selecting this category excludes

Strany 73 - 4.4 Configuring Dynamic DNS

HomeSafe User’s Guide 12-10 Parental Control Table 12-3 Parental Control : Filter LABEL DESCRIPTION Business/Economy Selecting this category exclude

Strany 74 - Table 4-2 SYSTEM : DDNS

HomeSafe User’s Guide Parental Control 12-11 Table 12-3 Parental Control : Filter LABEL DESCRIPTION Computers/Internet Selecting this category exc

Strany 75 - 4.6 Configuring Time Setting

HomeSafe User’s Guide 12-12 Parental Control Table 12-3 Parental Control : Filter LABEL DESCRIPTION Gay/Lesbian Selecting this category excludes pa

Strany 76 - System Screens 4-5

HomeSafe User’s Guide Parental Control 12-13 Table 12-3 Parental Control : Filter LABEL DESCRIPTION Clear All Click Clear All to empty the keyword

Strany 77 - 4-6 System Screens

HomeSafe User’s Guide 12-14 Parental Control type (TCP, UDP, or ICMP). The second field indicates the IP port number that defines the service. (Note

Strany 78 - LAN Screens

HomeSafe User’s Guide Parental Control 12-15 Table 12-4 Services SERVICE DESCRIPTION POP3(TCP:110) Post Office Protocol version 3 lets a client

Strany 79 - 5.4 Any IP

HomeSafe User’s Guide List of Figures xvii Figure 25-16 Example 3: Menu 15.1.1.1...

Strany 80 - 5.4.1 How Any IP Works

HomeSafe User’s Guide 12-16 Parental Control Figure 12-7 Parental Control : Edit The following table describes the labels in this screen. Table 12-5

Strany 81 - 5.5 Configuring IP

HomeSafe User’s Guide Parental Control 12-17 Table 12-5 Parental Control : Edit LABEL DESCRIPTION Groups Select a group from the drop down list b

Strany 82 - Table 5-1 LAN : IP

HomeSafe User’s Guide 12-18 Parental Control Table 12-5 Parental Control : Edit LABEL DESCRIPTION Edit Customized Services A Customized Service is

Strany 83 - 5.6 Configuring Static DHCP

HomeSafe User’s Guide Parental Control 12-19 Table 12-6 Parental Control : Bypass List LABEL DESCRIPTION Name Type a name to identify a device o

Strany 85 - Table 5-3 LAN : IP Alias

HomeSafe User’s Guide Firewall 13-1 Chapter 13 Firewall This chapter gives some background information on firewalls and explains how to get starte

Strany 86 - Chapter 6

HomeSafe User’s Guide 13-2 Firewall 4. Don't enable any local service (such as SNMP or NTP) that you don't use. Any enabled service could

Strany 87 - 6.1.3 ESS

HomeSafe User’s Guide Firewall 13-3 Table 13-1 Firewall: Settings LABEL DESCRIPTION Packets to Log Choose what LAN to WAN packets to log. Choose

Strany 88 - 6.2 Wireless LAN Basics

HomeSafe User’s Guide 13-4 Firewall LAN-to-LAN/HomeSafe means the LAN to the HomeSafe LAN interface. This is always allowed, as this is how you manag

Strany 89 - 6.3 Configuring Wireless

HomeSafe User’s Guide Firewall 13-5 Figure 13-3 Firewall: Service The following table describes the labels in this screen. Table 13-2 Firewall:

Strany 90 - 6.4 Configuring Roaming

HomeSafe User’s Guide xviii List of Figures Figure 32-2 Valid Commands...

Strany 91

HomeSafe User’s Guide 13-6 Firewall Table 13-2 Firewall: Service LABEL DESCRIPTION Clear All Click Clear All to empty the Blocked Service. Day to Bl

Strany 92 - Table 6-2 WLAN : Roaming

Remote Management V PPaarrtt VV:: Remote Management This part provides information and configuration instructions for configuration of re

Strany 94 - Wireless Security

HomeSafe User’s Guide Remote Management Screens 14-1 Chapter 14 Remote Management Screens This chapter provides information on the Remote Managemen

Strany 95 - 7-2 Wireless Security

HomeSafe User’s Guide 14-2 Remote Management Screens 3. The IP address in the Secured Client IP field does not match the client IP address. If it

Strany 96 - 7.3 WEP Overview

HomeSafe User’s Guide Remote Management Screens 14-3 Table 14-1 Remote Management : WWW LABEL DESCRIPTION Server Access Select the interface(s) th

Strany 97 - 7.3.3 Preamble Type

HomeSafe User’s Guide 14-4 Remote Management Screens Figure 14-3 Remote Management : Telnet The following table describes the labels in this scree

Strany 98 - Wireless Security 7-5

HomeSafe User’s Guide Remote Management Screens 14-5 Figure 14-4 Remote Management : FTP The following table describes the labels in this screen.

Strany 99 - 7.5 Introduction to WPA

HomeSafe User’s Guide 14-6 Remote Management Screens ) SNMP is only available if TCP/IP is configured. Figure 14-5 SNMP Management Model An SNMP

Strany 100 - WPA - PSK Authentication

HomeSafe User’s Guide Remote Management Screens 14-7 14.6.1 Supported MIBs The HomeSafe supports MIB II that is defined in RFC-1213 and RFC-1215.

Strany 101 - 7-8 Wireless Security

HomeSafe User’s Guide List of Tables xix List of Tables Table 1-1 IEEE 802.11b ...

Strany 102

HomeSafe User’s Guide 14-8 Remote Management Screens Figure 14-6 Remote Management : SNMP The following table describes the labels in this screen.

Strany 103 - Figure 7-8 Wireless: WPA

HomeSafe User’s Guide Remote Management Screens 14-9 Table 14-5 Remote Management : SNMP LABEL DESCRIPTION Service Access Select the interface(s)

Strany 104 - 7.9 802.1x Overview

HomeSafe User’s Guide 14-10 Remote Management Screens 14.8 Configuring Security To change your HomeSafe’s security settings, click REMOTE MGMT, the

Strany 105

HomeSafe User’s Guide Remote Management Screens 14-11 Table 14-7 Remote Management : Security LABEL DESCRIPTION Apply Click Apply to save your cust

Strany 107 - 7-14 Wireless Security

HomeSafe User’s Guide VPN Screens 14-1

Strany 108 - Wireless Security 7-15

Logs and Maintenance VI PPaarrtt VVII:: Logs and Maintenance This part covers the centralized logs and maintenance screens.

Strany 109 - 7.13 Configuring 802.1x

HomeSafe User’s Guide Logs 15-1 Chapter 15 Centralized Logs This chapter contains information about configuring general log settings and viewing the

Strany 110 - 7.14 MAC Filter

HomeSafe User’s Guide 15-2 Logs Table 15-1 View Logs LABEL DESCRIPTION Destination This field lists the destination IP address and the port number

Strany 111 - DESCRIPTION

HomeSafe User’s Guide Logs 15-3 Figure 15-2 Log Settings The following table describes the labels in this screen. Table 15-2 Log Settings LABEL DESC

Strany 112 - Wireless Security 7-19

HomeSafe User’s Guide ii Copyright Copyright Copyright © 2004 by ZyXEL Communications Corporation. The contents of this publication may not be reprod

Strany 113

HomeSafe User’s Guide xx List of Tables Table 7-6 WLAN : Wireless : 802.1x and Dynamic WEP...

Strany 114 - 7.18 Configuring RADIUS

HomeSafe User’s Guide 15-4 Logs Table 15-2 Log Settings LABEL DESCRIPTION Mail Subject Type a title that you want to be in the subject line of the

Strany 115 - Table 7-11 WLAN : RADIUS

HomeSafe User’s Guide Maintenance 16-1 Chapter 16 Maintenance This chapter displays system information such as ZyNOS firmware, port IP addresses and

Strany 116 - Wireless Security 7-23

HomeSafe User’s Guide 16-2 Maintenance Table 16-1 Maintenance : Status LABEL DESCRIPTION IP Subnet Mask This is the WAN port subnet mask. DHCP Thi

Strany 117

HomeSafe User’s Guide Maintenance 16-3 Table 16-2 Maintenance : System Statistics LABEL DESCRIPTION Poll Interval(s) Enter the time interval for re

Strany 118 - Figure 8-1 WAN : Route

HomeSafe User’s Guide 16-4 Maintenance 16.4 Any IP Table Click MAINTENANCE, Any IP Table. The Any IP table shows current read-only information (incl

Strany 119 - Table 8-1 WAN : Route

HomeSafe User’s Guide Maintenance 16-5 Table 16-5 Maintenance : Association List LABEL DESCRIPTION Association Time This field displays the time a

Strany 120 - 8.4.2 PPPoE Encapsulation

HomeSafe User’s Guide 16-6 Maintenance Figure 16-7 Upload Warning The HomeSafe automatically restarts in this time causing a temporary network disco

Strany 121 - 8.4.3 PPTP Encapsulation

HomeSafe User’s Guide Maintenance 16-7 Figure 16-10 Maintenance : Configuration 16.7.1 Backup Configuration Backup configuration allows you to back

Strany 122 - WAN 8-5

HomeSafe User’s Guide 16-8 Maintenance Figure 16-11 Configuration : Restore Successful The HomeSafe automatically restarts in this time causing a t

Strany 123 - 8.5 Configuring WAN IP

HomeSafe User’s Guide Maintenance 16-9 Figure 16-14 Factory Defaults You can also press the RESET button on the rear panel to reset the factory defa

Strany 124 - Table 8-5 WAN : IP

HomeSafe User’s Guide List of Tables xxi Table 16-6 Maintenance : Firmware Upload ...

Strany 125 - Figure 8-6 WAN : MAC Setup

SMT General Configuration VII PPaarrtt VVIIII:: SMT General Configuration This part covers System Management Terminal configuration for ge

Strany 127 - The screen appears as shown

HomeSafe User’s Guide Introducing the SMT 17-1 Chapter 17 Introducing the SMT This chapter explains how to access and navigate the System Management

Strany 128 - WAN 8-11

HomeSafe User’s Guide 17-2 Introducing the SMT Figure 17-2 SMT Menu Overview 17.2 Navigating the SMT Interface The SMT (System Management Terminal)

Strany 129 - SUA/NAT and Static Route

HomeSafe User’s Guide Introducing the SMT 17-3 Table 17-1 Main Menu Commands Entering information Type in or press [SPACE BAR], then press [ENTER]. Y

Strany 130

HomeSafe User’s Guide 17-4 Introducing the SMT Table 17-2 Main Menu Summary # MENU TITLE DESCRIPTION 14 Dial-in User Setup Use this menu to set up

Strany 131 - Screens

HomeSafe User’s Guide Menu 1 General Setup 18-1 Chapter 18 Menu 1 General Setup Menu 1 - General Setup contains administrative and system-related i

Strany 132 - 9.1.4 NAT Application

HomeSafe User’s Guide 18-2 Menu 1 General Setup Table 18-1 Menu 1 General Setup FIELD DESCRIPTION EXAMPLE Domain Name Enter the domain name (if you

Strany 133 - 9.1.5 NAT Mapping Types

HomeSafe User’s Guide Menu 1 General Setup 18-3 Figure 18-2 Menu 1.1 Configure Dynamic DNS Follow the instructions in the next table

Strany 134 - 9.3 SUA Server

HomeSafe User’s Guide 18-4 Menu 1 General Setup Table 18-2 Menu 1.1 Configure Dynamic DNS FIELD DESCRIPTION EXAMPLE IP Address Update Policy: Yo

Strany 135 - NAT Screens 9-5

HomeSafe User’s Guide xxii List of Tables Table 32-1 Budget Management...

Strany 136 - 9.4 Configuring SUA Server

HomeSafe User’s Guide Menu 2 WAN Setup 19-1 Chapter 19 Menu 2 WAN Setup This chapter describes how to configure the WAN using menu 2. 19.1 Introdu

Strany 138 - Table 9-5 Address Mapping

HomeSafe User’s Guide Menu 3 LAN Setup 20-1 Chapter 20 Menu 3 LAN Setup This chapter covers how to configure your wired Local Area Network (LAN) sett

Strany 139 - 9.6 Trigger Port Forwarding

HomeSafe User’s Guide 20-2 Menu 3 LAN Setup Figure 20-3 Menu 3.2 TCP/IP and DHCP Ethernet Setup Follow the instructions in the next t

Strany 140 - 9-10 NAT Screens

HomeSafe User’s Guide Menu 3 LAN Setup 20-3 Table 20-1 Menu 3.2: DHCP Ethernet Setup Fields FIELD DESCRIPTION EXAMPLE First DNS Server Second DNS S

Strany 141 - Table 9-7 Trigger Port

HomeSafe User’s Guide 20-4 Menu 3 LAN Setup Table 20-2 Menu 3.2: LAN TCP/IP Setup Fields FIELD DESCRIPTION EXAMPLE Edit IP Alias The HomeSafe supp

Strany 142

HomeSafe User’s Guide Menu 3 LAN Setup 20-5 Table 20-3 Menu 3.2.1: IP Alias Setup FIELD DESCRIPTION EXAMPLE IP Alias 1, 2 Choose Yes to configure

Strany 143 - Static Route Screens

HomeSafe User’s Guide 20-6 Menu 3 LAN Setup Table 20-4 Menu 3.5 Wireless LAN Setup FIELD DESCRIPTION EXAMPLE AP must have the same ESSID. Enter a des

Strany 144

HomeSafe User’s Guide Menu 3 LAN Setup 20-7 Table 20-4 Menu 3.5 Wireless LAN Setup FIELD DESCRIPTION EXAMPLE 802.11 Mode Select 802.11b Only to allow

Strany 145 - NAT Screens 10-3

HomeSafe User’s Guide 20-8 Menu 3 LAN Setup Figure 20-8 Menu 3.5.1 WLAN MAC Address Filter The following table describes the fields in

Strany 146

HomeSafe User’s Guide Preface xxiii Preface About This User's Manual Congratulations on your purchase of the HS-100 Parental Control Gateway or

Strany 147 - Chapter 11

HomeSafe User’s Guide Menu 3 LAN Setup 20-9 Figure 20-9 Menu 3.5 Wireless LAN Setup Step 3. Move the cursor to the Edit Roaming Config

Strany 149

HomeSafe User’s Guide Internet Access 21-1 Chapter 21 Internet Access This chapter shows you how to configure your HomeSafe for Internet access . 21.

Strany 150

HomeSafe User’s Guide 21-2 Internet Access Table 21-1 Menu 4: Internet Access Setup (Ethernet) FIELD DESCRIPTION Retype to Confirm Enter your pas

Strany 151

HomeSafe User’s Guide Internet Access 21-3 Figure 21-2 Internet Access Setup (PPTP) The following table contains instructions about th

Strany 152

HomeSafe User’s Guide 21-4 Internet Access Table 21-3 New Fields in Menu 4 (PPPoE) screen FIELD DESCRIPTION EXAMPLE Idle Timeout This value spec

Strany 153

HomeSafe User’s Guide Remote Node Configuration 22-1 Chapter 22 Remote Node Configuration This chapter covers remote node configuration. 22.1 Introd

Strany 154

HomeSafe User’s Guide 22-2 Remote Node Configuration Table 22-1 Menu 11.1 Remote Node Profile for Ethernet Encapsulation FIELD DESCRIPTION EXAMPLE R

Strany 155 - Parental Control

HomeSafe User’s Guide Remote Node Configuration 22-3 Table 22-1 Menu 11.1 Remote Node Profile for Ethernet Encapsulation FIELD DESCRIPTION EXAMPLE

Strany 156

HomeSafe User’s Guide 22-4 Remote Node Configuration Table 22-2 Fields in Menu 11.1 (PPPoE Encapsulation Specific) FIELD DESCRIPTION EXAMPLE Service

Strany 157 - Internet

HomeSafe User’s Guide xxiv Preface Syntax Conventions • The version number on the title page is the latest firmware version that is documented in th

Strany 158

HomeSafe User’s Guide Remote Node Configuration 22-5 Table 22-3 Menu 11.1 Remote Node Profile for PPTP Encapsulation FIELD DESCRIPTION EXAMPLE Enca

Strany 159

HomeSafe User’s Guide 22-6 Remote Node Configuration Table 22-4 Remote Node Network Layer Options FIELD DESCRIPTION EXAMPLE My WAN Addr This field

Strany 160

HomeSafe User’s Guide Remote Node Configuration 22-7 Use menu 11.5 to specify the filter set(s) to apply to the incoming and outgoing traffic between

Strany 161 - Parental Control 12-7

HomeSafe User’s Guide 22-8 Remote Node Configuration Table 22-5 Menu 11.6: Traffic Redirect Setup FIELD DESCRIPTION EXAMPLE Active Press [SPACE BAR]

Strany 162 - 12-8 Parental Control

HomeSafe User’s Guide Static Route Setup 23-1 Chapter 23 Static Route Setup This chapter shows how to setup IP static routes. 23.1 IP Static Route

Strany 163 - Parental Control 12-9

HomeSafe User’s Guide 23-2 Static Route Setup Table 23-1 Menu12.1 Edit IP Static Route FIELD DESCRIPTION IP Subnet Mask Type the subnet mask for thi

Strany 164 - 12-10 Parental Control

HomeSafe User’s Guide Dial-in User Setup 24-1 Chapter 24 Dial-in User Setup This chapter shows you how to create user accounts on the HomeSafe. 24.

Strany 166 - HomeSafe checks

HomeSafe User’s Guide NAT 25-1 Chapter 25 Network Address Translation (NAT) This chapter discusses how to configure NAT on the HomeSafe. 25.1 Using N

Strany 167 - 12.8 Parental Control Edit

HomeSafe User’s Guide 25-2 NAT Step 3. Move the cursor to the Edit IP field, press [SPACE BAR] to select Yes and then press [ENTER] to bring up Men

Strany 168 - Table 12-4 Services

HomeSafe User’s Guide Preface xxv

Strany 169 - Parental Control 12-15

HomeSafe User’s Guide NAT 25-3 25.3.1 Address Mapping Sets Enter 1 to bring up Menu 15.1 — Address Mapping Sets. Figure 25-4 Menu 15.1 Address

Strany 170

HomeSafe User’s Guide 25-4 NAT Table 25-2 SUA Address Mapping Rules FIELD DESCRIPTION EXAMPLE Type These are the mapping types. Server allows us to

Strany 171

HomeSafe User’s Guide NAT 25-5 Table 25-3 Menu 15.1.1 First Set FIELD DESRIPTION EXAMPLE Set Name Enter a name for this set of rules. This is a requ

Strany 172

HomeSafe User’s Guide 25-6 NAT Table 25-4 Menu 15.1.1.1 Editing/Configuring an Individual Rule in a Set FIELD DESCRIPTION EXAMPLE Server. Start Thi

Strany 173

HomeSafe User’s Guide NAT 25-7 Figure 25-9 Multiple Servers Behind NAT Example 25.5 General NAT Examples The following are some examples of NAT conf

Strany 174

HomeSafe User’s Guide 25-8 NAT 25.5.2 Example 2: Internet Access with an Inside Server The dynamic Inside Global Address is assigned by the ISP. Fi

Strany 175 - Firewall

HomeSafe User’s Guide NAT 25-9 Figure 25-14 NAT Example 3 Step 1. In this case you need to configure Address Mapping Set 1 from Menu 15.1 - Address

Strany 176

HomeSafe User’s Guide 25-10 NAT Figure 25-16 Example 3: Menu 15.1.1.1 Figure 25-17 Example 3: Final Menu 15.1.1 Now configur

Strany 177 - 13.3.1 LAN-to-WAN rules

HomeSafe User’s Guide NAT 25-11 Example 3: Menu 15.2 25.5.4 Example 4: NAT Unfriendly Application Programs Some applications do not support NAT Map

Strany 178 - 13.4 Services

HomeSafe User’s Guide 25-12 NAT Figure 25-20 Example 4: Menu 15.1.1 Address Mapping Rules 25.6 Configuring Trigger Port Forwarding ) Only on

Strany 179 - Table 13-2 Firewall: Service

Getting Started I PPaarrtt II:: Getting Started This part helps you get to know your HomeSafe, introduces the web configurator and covers

Strany 180 - 13-6 Firewall

HomeSafe User’s Guide NAT 25-13 Table 25-5 Menu 15.3 Trigger Port Setup FIELD DESCRIPTION EXAMPLE Rule This is the rule index number. 1 Name Ent

Strany 182

HomeSafe User’s Guide Firewall 26-1 Chapter 26 Enabling the Firewall This chapter shows you how to get started with the HomeSafe firewall. 26.1 Remot

Strany 183 - Remote Management Screens

SMT Advanced Management VIII PPaarrtt VVIIIIII:: SMT Advanced Management This part discusses filtering setup, SNMP, system security, syste

Strany 184 - 14.2 Configuring WWW

HomeSafe User’s Guide Filter Configuration 27-1 Chapter 27 Filter Configuration This chapter shows you how to create and apply filters. 27.1 Intro

Strany 185 - 14.4 Configuring TELNET

HomeSafe User’s Guide 27-2 Filter Configuration apply up to four filter sets to a particular port to block multiple types of packets. With each fi

Strany 186 - 14.5 Configuring FTP

HomeSafe User’s Guide Filter Configuration 27-3 27.2 Configuring a Filter Set The HomeSafe includes filtering for NetBIOS over TCP/IP packets by d

Strany 187 - 14.6 SNMP

HomeSafe User’s Guide 27-4 Filter Configuration Table 27-1 Abbreviations Used in the Filter Rules Summary Menu FIELD DESCRIPTION M More. “Y” mean

Strany 188

HomeSafe User’s Guide Filter Configuration 27-5 To configure TCP/IP rules, select TCP/IP Filter Rule from the Filter Type field and press [ENTER] t

Strany 189 - 14.6.3 Configuring SNMP

HomeSafe User’s Guide 27-6 Filter Configuration Table 27-3 TCP/IP Filter Rule FIELD DESCRIPTION OPTIONS Port # Enter the source port of the packe

Strany 191 - 14.7 Configuring DNS

HomeSafe User’s Guide Filter Configuration 27-7 Packetinto IP FilterMatchedMatchedYesAction MatchedAction Not MatchedMore?NoFilter Active?CheckIP P

Strany 192 - 14.8 Configuring Security

HomeSafe User’s Guide 27-8 Filter Configuration To configure a generic rule, select Generic Filter Rule in the Filter Type field in menu 21.1.4.1

Strany 193

HomeSafe User’s Guide Filter Configuration 27-9 Table 27-4 Generic Filter Rule Menu Fields FIELD DESCRIPTION OPTIONS Action Not Matched Select t

Strany 194

HomeSafe User’s Guide 27-10 Filter Configuration Step 6. Enter 1 to configure the first filter rule (the only filter rule of this set). Make the

Strany 195 - VPN Screens 14-1

HomeSafe User’s Guide Filter Configuration 27-11 Figure 27-11 Example Filter Rules Summary: Menu 21.1.3 After you’ve created the filte

Strany 196 - Logs and Maintenance

HomeSafe User’s Guide 27-12 Filter Configuration Figure 27-12 Protocol and Device Filter Sets 27.5 Firewall Versus Filters Firewall configuratio

Strany 197 - Centralized Logs

HomeSafe User’s Guide Filter Configuration 27-13 four filter sets by entering their numbers separated by commas. The HomeSafe already has filters t

Strany 199 - Table 15-2 Log Settings

HomeSafe User’s Guide SNMP Configuration 28-1 Chapter 28 SNMP Configuration This chapter explains SNMP Configuration menu 22. 28.1 About SNMP Simpl

Strany 200 - 15-4 Logs

HomeSafe User’s Guide 28-2 SNMP Configuration • GetNext - Allows the manager to retrieve the next object variable from a table or

Strany 201 - Maintenance

HomeSafe User’s Guide Getting to Know Your HomeSafe 1-1 Chapter 1 Getting to Know Your HomeSafe This chapter intro

Strany 202

HomeSafe User’s Guide SNMP Configuration 28-3 28.4 SNMP Traps The HomeSafe will send traps to the SNMP manager when any one of the following even

Strany 204 - 16.5 Association List

HomeSafe User’s Guide System Security 29-1 Chapter 29 System Security This chapter describes how to configure the system security on the HomeSafe.

Strany 205 - 16.6 F/W Upload Screen

HomeSafe User’s Guide 29-2 System Security Table 29-1 Menu 23.2 System Security : RADIUS Server FIELD DESCRIPTION EXAMPLE Authent

Strany 206 - 16.7 Configuration Screen

HomeSafe User’s Guide System Security 29-3 Figure 29-5 Menu 23.4 System Security : IEEE802.1x The following table describes the fields

Strany 207 - Maintenance 16-7

HomeSafe User’s Guide 29-4 System Security Table 29-2 Menu 23.4 System Security : IEEE802.1x FIELD DESCRIPTION PSK Type a pre-sha

Strany 208

HomeSafe User’s Guide System Information and Diagnosis 30-1 Chapter 30 System Information and Diagnosis This chapter covers the information and di

Strany 209 - 16.8 Restart Screen

HomeSafe User’s Guide 30-2 System Information and Diagnosis Figure 30-2 Menu 24.1 System Maintenance : Status

Strany 210

HomeSafe User’s Guide System Information and Diagnosis 30-3 30.2 System Information To get to the System Information: Step 1. Enter 24 to display

Strany 211

HomeSafe User’s Guide 30-4 System Information and Diagnosis 30.2.2 Console Port Speed You can set up different port speeds for the

Strany 212 - Introducing the SMT

HomeSafe User’s Guide 1-2 Getting to Know Your HomeSafe Content Filtering The HomeSafe can block access to Internet services accor

Strany 213 - HomeSafe

HomeSafe User’s Guide System Information and Diagnosis 30-5 Your HomeSafe sends five types of syslog messages. Some examples (not all HomeSafe spec

Strany 214 - ? > or ChangeMe

HomeSafe User’s Guide 30-6 System Information and Diagnosis 5. Firewall log Firewall Log Message Format SdcmdSyslogSend(SYSLOG_FI

Strany 215

HomeSafe User’s Guide System Information and Diagnosis 30-7 Figure 30-8 Menu 24.4 System Maintenance : Diagnostic 30.4.1 WAN DHCP DHCP f

Strany 216 - Menu 1 General Setup

HomeSafe User’s Guide 30-8 System Information and Diagnosis Table 30-4 System Maintenance Menu Diagnostic Reboot System Enter 11

Strany 217

HomeSafe User’s Guide Firmware and Configuration File Maintenance 31-1 Chapter 31 Firmware and Configuration File Maintenance This chapter tells yo

Strany 218

HomeSafe User’s Guide 31-2 Firmware and Configuration File Maintenance 31.2 Backup Configuration Option 5 from Menu 24 – System Maintenance allows

Strany 219 - 18-4 Menu 1 General Setup

HomeSafe User’s Guide Firmware and Configuration File Maintenance 31-3 31.2.4 GUI-based FTP Clients The following table describes some of the comma

Strany 220 - Menu 2 WAN Setup

HomeSafe User’s Guide 31-4 Firmware and Configuration File Maintenance 31.2.7 TFTP Command Example The following is an example TFTP command: tftp [

Strany 221

HomeSafe User’s Guide Firmware and Configuration File Maintenance 31-5 Figure 31-3 Telnet into Menu 24.6 Step 1. Launch the FTP client on your com

Strany 222 - Menu 3 LAN Setup

HomeSafe User’s Guide 31-6 Firmware and Configuration File Maintenance ) WARNING! DO NOT INTERRUPT THE FILE TRANSFER PROCESS AS THIS MAY PERMANENT

Strany 223

HomeSafe User’s Guide FCC iii Federal Communications Commission (FCC) Interference Statement This device complies with Part 15 of FCC rules. Operati

Strany 224 - Menu 3 LAN Setup 20-3

HomeSafe User’s Guide Getting to Know Your HomeSafe 1-3 Table 1-2 IEEE 802.11g DATA RATE (MBPS) MODULATION 6/9/12

Strany 225 - 20.3.1 IP Alias Setup

HomeSafe User’s Guide Firmware and Configuration File Maintenance 31-7 31.4.3 FTP File Upload Command from the DOS Prompt Example Step 1. Launch t

Strany 226 - 20.4 Wireless LAN Setup

HomeSafe User’s Guide 31-8 Firmware and Configuration File Maintenance Step 5. Use the TFTP client (see the example below) to transfer files betwe

Strany 227 - Enter “0x” before the key to

HomeSafe User’s Guide System Maintenance 32-1 Chapter 32 System Maintenance This chapter leads you through SMT menus 24.8 to 24.10. 32.1 Command I

Strany 228

HomeSafe User’s Guide 32-2 System Maintenance Figure 32-2 Valid Commands 32.2 Call Control Support The HomeSafe provides two call control functions

Strany 229

HomeSafe User’s Guide System Maintenance 32-3 Table 32-1 Budget Management FIELD DESCRIPTION EXAMPLE Remote Node Enter the index number of the

Strany 230

HomeSafe User’s Guide 32-4 System Maintenance 32.3 Time and Date Setting The Real Time Chip (RTC) keeps track of the time and date (not available o

Strany 231

HomeSafe User’s Guide System Maintenance 32-5 Table 32-3 Time and Date Setting Fields FIELD DESCRIPTION Time Zone Press [SPACE BAR] and then [ENTE

Strany 233

HomeSafe User’s Guide Remote Management 33-1 Chapter 33 Remote Management This chapter covers remote management (SMT menu 24.11). 33.1 Remote Manag

Strany 234

HomeSafe User’s Guide 33-2 Remote Management Table 33-1 Menu 24.11 – Remote Management Control FIELD DESCRIPTION EXAMPLE Port This field shows the

Strany 235 - 21.5 Basic Setup Complete

HomeSafe User’s Guide 1-4 Getting to Know Your HomeSafe Network Address Translation (NAT) Network Address Translation (NAT) allows

Strany 236 - Remote Node Configuration

HomeSafe User’s Guide Call Scheduling 34-1 Chapter 34 Call Scheduling Call scheduling (applicable for PPPoA or PPPoE encapsulation only) allows you

Strany 237

HomeSafe User’s Guide 34-2 Call Scheduling Figure 34-2 Menu 26.1 Schedule Set Setup If a connection has been already established, your HomeSafe will

Strany 238 - 22.2.2 PPPoE Encapsulation

HomeSafe User’s Guide Call Scheduling 34-3 Table 34-1 Menu 26.1 Schedule Set Setup FIELD DESCRIPTION EXAMPLE Action Forced On means that the connec

Strany 239 - 22.2.3 PPTP Encapsulation

Appendices and Index IX PPaarrtt IIXX:: Appendices and Index This section provides some Appendices and an Index.

Strany 241 - 22.4 Remote Node Filter

HomeSafe User’s Guide Troubleshooting

Strany 242

HomeSafe User’s Guide A-2

Strany 243

HomeSafe User’s Guide Troubleshooting

Strany 244 - Static Route Setup

HomeSafe User’s Guide B-2

Strany 245 - 23-2 Static Route Setup

HomeSafe User’s Guide PPTP

Strany 246 - Dial-in User Setup

HomeSafe User’s Guide Getting to Know Your HomeSafe 1-5 Wireless Association List (HS-100W only) With the wireless

Strany 247

HomeSafe User’s Guide C-2 PPTP PPTP Protocol Overview PPTP is very similar to L2TP, since L2TP is based on both PPTP and L2F (Cisco’s Layer 2 Forward

Strany 248 - Chapter 25

HomeSafe User’s Guide PPTP

Strany 250 - 25.3.1 Address Mapping Sets

HomeSafe User’s Guide Log Descriptions D-

Strany 251

HomeSafe User’s Guide D-2 Log Descriptions C

Strany 252

HomeSafe User’s Guide Log Descriptions D-

Strany 253

HomeSafe User’s Guide D-4 Log Descriptions C

Strany 254 - 25.5 General NAT Examples

HomeSafe User’s Guide Log Descriptions D-

Strany 256

HomeSafe User’s Guide Setting up Your Computer’s IP Address E-1 Append

Strany 257

HomeSafe User’s Guide 1-6 Getting to Know Your HomeSafe 1.3.3 Wireless LAN Application Add a wireless LAN to your existing netwo

Strany 258

HomeSafe User’s Guide E-2 Setting up Your Computer’s IP Address b.

Strany 259

HomeSafe User’s Guide Setting up Your Computer’s IP Address E-3 -If

Strany 260 - NAT 25-13

HomeSafe User’s Guide E-4 Setting up Your Computer’s IP Address Win

Strany 261

HomeSafe User’s Guide Setting up Your Computer’s IP Address E-5 4. Sel

Strany 262 - Enabling the Firewall

HomeSafe User’s Guide E-6 Setting up Your Computer’s IP Address 6.

Strany 263

HomeSafe User’s Guide Setting up Your Computer’s IP Address E-7 7. In

Strany 264 - Filter Configuration

HomeSafe User’s Guide E-8 Setting up Your Computer’s IP Address Mac

Strany 265 - Filter Set

HomeSafe User’s Guide Setting up Your Computer’s IP Address E-9 Verify

Strany 267

HomeSafe User’s Guide Wireless LAN and IEEE 802.11 F-

Strany 268

HomeSafe User’s Guide Introducing the Web Configurator 2-1 Chapter 2 Introducing the Web Configurator This chapter descri

Strany 269

HomeSafe User’s Guide Wireless LAN and IEEE

Strany 270 - Filter Configuration 27-7

HomeSafe User’s Guide Wireless LAN and IEEE 802.11 F-

Strany 272 - 27.3 Example Filter

HomeSafe User’s Guide Wireless LAN with IEEE 802.1x G

Strany 273

HomeSafe User’s Guide Wireless LAN with IEEE

Strany 274 - 27.4 Filter Types and NAT

HomeSafe User’s Guide Types of EAP Authentication H-1 Appendix H Types of EAP Authentication This appendix discusses the f

Strany 275 - 27.6 Applying a Filter

HomeSafe User’s Guide H-2 Types of EAP Authentication Comparison of EAP Authentication Types EAP-MD5 EAP-TLS EAP-TTLS PEAP Certificate – Cli

Strany 276

HomeSafe User’s Guide Antenna Selection and Positioning Recommendation I-1 Appendix I

Strany 277

HomeSafe User’s Guide I-2 • Directional antennas concentrate the RF signal in a beam, like a flashlight. The angle of the beam width determines th

Strany 278 - SNMP Configuration

HomeSafe User’s Guide Brute-Force Password Guessing Protection J-1 Appendix

Strany 279 - 28.3 SNMP Configuration

HomeSafe User’s Guide 2-2 Introducing the Web Configurator ) The Welcome screen only appears when you first enter the Home

Strany 281

HomeSafe User’s Guide Triangle Route K-1 Appendix K Triangle Route The Ide

Strany 282 - System Security

HomeSafe User’s Guide K-2 Triangle Route Step 1. A computer on the LAN initiates a connection by sending a SYN packet to a receiving server on the

Strany 283 - 29.1.3 802.1x

HomeSafe User’s Guide Index L-1 Appendix L Index 8 802.1x...

Strany 284

HomeSafe User’s Guide L-2 Index Ethernet Encapsulation...9-5, 21-1, 22-1, 22-7 Extended Service Set...F-2, 6-2 E

Strany 285

HomeSafe User’s Guide Index L-3 Management Information Base (MIB) 14-6, 28-

Strany 286 - Chapter 30

HomeSafe User’s Guide L-4 Index Roaming ... 6-5 Enable on ZyAIR ...

Strany 287

HomeSafe User’s Guide Index L-5 V VPN...

Strany 288 - 30.2 System Information

HomeSafe User’s Guide Introducing the Web Configurator 2-3 Figure 2-3 Wizard Step 2 : Wireless LAN Setup The following t

Strany 289 - 30.3 Log and Trace

HomeSafe User’s Guide 2-4 Introducing the Web Configurator Figure 2-4 Wizard Step 2 : Wireless LAN Setup Basic Security Th

Strany 290

HomeSafe User’s Guide Introducing the Web Configurator 2-5 ) The wireless stations and HomeSafe must use the same ESSID,

Strany 291 - 30.4 Diagnostic

HomeSafe User’s Guide 2-6 Introducing the Web Configurator Table 2-5 Wizard Step 3 : Internet Access Setup LABEL DESCRIP

Strany 292 - 30.4.1 WAN DHCP

HomeSafe User’s Guide iv Information for Canadian Users Information for Canadian Users The Industry Canada label identifies certified equipment. Th

Strany 293

HomeSafe User’s Guide Introducing the Web Configurator 2-7 Figure 2-8 Wizard Step 3 : Internet Access Setup The followin

Strany 294 - Chapter 31

HomeSafe User’s Guide 2-8 Introducing the Web Configurator Table 2-8 Wizard Step 3 : Internet Access Static IP Address Setu

Strany 295 - 31.2 Backup Configuration

HomeSafe User’s Guide Introducing the Web Configurator 2-9 Figure 2-11 Wizard Step 4 : Parental Control Wizard The follo

Strany 296 - 31.2.4 GUI-based FTP Clients

HomeSafe User’s Guide 2-10 Introducing the Web Configurator Figure 2-12 Wizard Step 4 : Parental Control Time Setup The fo

Strany 297 - ) WARNING!

HomeSafe User’s Guide Introducing the Web Configurator 2-11 Figure 2-13 Wizard Step 4 : Create or Edit a Profile The fo

Strany 298

HomeSafe User’s Guide 2-12 Introducing the Web Configurator Figure 2-14 Wizard Step 4 : Parental Control Profile Informati

Strany 299

HomeSafe User’s Guide Introducing the Web Configurator 2-13 2.6.5 Step 4 : Parental Control Time Allowance This screen a

Strany 300 - 31.4.5 TFTP File Upload

HomeSafe User’s Guide 2-14 Introducing the Web Configurator The following table describes the labels in this screen. Table

Strany 301

HomeSafe User’s Guide Introducing the Web Configurator 2-15 Figure 2-17 Wizard Step 4 : Parental Control Application Blo

Strany 302 - System Maintenance

HomeSafe User’s Guide 2-16 Introducing the Web Configurator Figure 2-18 Wizard Step 4 : Parental Control Summary The follo

Strany 303 - 32.2 Call Control Support

HomeSafe User’s Guide Warranty v ZyXEL Limited Warranty ZyXEL warrants to the original end user (purchaser) that this product is free from any defec

Strany 304 - 32.2.2 Call History

HomeSafe User’s Guide Introducing the Web Configurator 2-17 ) The web site displays a registration successful web page.

Strany 305 - 32.3 Time and Date Setting

HomeSafe User’s Guide 2-18 Introducing the Web Configurator Figure 2-20 Wizard Step 4 : Content Filter Registration If you

Strany 306 - 32.3.1 Resetting the Time

HomeSafe User’s Guide Introducing the Web Configurator 2-19 Figure 2-23 Content Filter Activation Failure 2.7.1 Content

Strany 307

HomeSafe User’s Guide 2-20 Introducing the Web Configurator If you want to configure more of your HomeSafe features, procee

Strany 308 - Chapter 33

HomeSafe User’s Guide Introducing the Web Configurator 2-21 5. You should now see the MAIN MENU screen (see Figure 2-27)

Strany 309 - 33-2 Remote Management

HomeSafe User’s Guide 2-22 Introducing the Web Configurator Table 2-17 Screens Summary LINK TAB FUNCTION WIZARD SETUP CO

Strany 310 - Call Scheduling

HomeSafe User’s Guide Introducing the Web Configurator 2-23 Table 2-17 Screens Summary LINK TAB FUNCTION PARENTAL CONTR

Strany 312

HomeSafe User’s Guide Connection Wizard 3-1 Chapter 3 Connection Wizard This chapter provide

Strany 313 - Appendices and Index

HomeSafe User’s Guide 3-2 Connection Wizard Figure 3-1 Connection Wizard : General Setup 3.3 Connection Wizard: Screen 2 Set

Strany 314

HomeSafe User’s Guide vi Customer Support Customer Support When you contact your customer support representative please have the following informatio

Strany 315 - Troubleshooting

HomeSafe User’s Guide Connection Wizard 3-3 Table 3-1 Connection Wizard : Wireless LAN Setup L

Strany 316

HomeSafe User’s Guide 3-4 Connection Wizard Key 1 to Key 4 The WEP keys are used to encrypt data. Both the HomeSafe and the wi

Strany 317 - Appendix B

HomeSafe User’s Guide Connection Wizard 3-5 Figure 3-5 Connection Wizard : Ethernet Encapsula

Strany 318

HomeSafe User’s Guide 3-6 Connection Wizard For the service provider, PPPoE offers an access and authentication method that wor

Strany 319 - Appendix C

HomeSafe User’s Guide Connection Wizard 3-7 Table 3-5 Connection Wizard : PPPoE Encapsulation

Strany 320 - PPTP Protocol Overview

HomeSafe User’s Guide 3-8 Connection Wizard Table 3-6 Connection Wizard : PPTP Encapsulation LABEL DESCRIPTION User Name Type

Strany 321

HomeSafe User’s Guide Connection Wizard 3-9 ) Regardless of your particular situation, do not

Strany 322

HomeSafe User’s Guide 3-10 Connection Wizard Table 3-8 Example of Network Properties for LAN Servers with Fixed IP Addresses C

Strany 323 - Log Descriptions

HomeSafe User’s Guide Connection Wizard 3-11 Table 3-9 Connection Wizard : WAN Setup LABEL D

Strany 324

HomeSafe User’s Guide 3-12 Connection Wizard Figure 3-10 Connection Wizard Problems Well done! You have successfully set up yo

Strany 325

HomeSafe User’s Guide Table of Contents vii Table of Contents Getting Started...

Strany 326 - Log Commands

HomeSafe User’s Guide Connection Wizard 3-13

Strany 327 - Log Command Example

System, LAN, and Wireless LAN II PPaarrtt IIII:: System, LAN, WLAN and WAN This part covers configuration of the system, LAN, WLAN and WAN

Strany 328

HomeSafe User’s Guide System Screens 4-1 Chapter 4 System Screens This chapter provides information on the System screens. 4.1 System Overview See

Strany 329 - Appendix E

HomeSafe User’s Guide 4-2 System Screens Table 4-1 SYSTEM : General Setup LABEL DESCRIPTION First DNS Server Second DNS Server Third DNS Server

Strany 330 - Properties

HomeSafe User’s Guide System Screens 4-3 Figure 4-2 SYSTEM : DDNS The following table describes the labels in this screen. Table 4-2 SYSTEM : DDNS

Strany 331

HomeSafe User’s Guide 4-4 System Screens Table 4-2 SYSTEM : DDNS LABEL DESCRIPTION Apply Click Apply to save your changes back to the HomeSafe. Reset

Strany 332 - Windows 2000/NT/XP

HomeSafe User’s Guide System Screens 4-5 Figure 4-4 SYSTEM : Time Setting The following table describes the labels in this screen. Table 4-4 SYSTE

Strany 333

HomeSafe User’s Guide 4-6 System Screens Table 4-4 SYSTEM : Time Setting LABEL DESCRIPTION Daylight Savings Select this option if you use daylight s

Strany 334

HomeSafe User’s Guide LAN Screens 5-1 Chapter 5 LAN Screens This chapter describes how to configure LAN settings. 5.1 LAN Overview Local Area Netw

Strany 335

HomeSafe User’s Guide 5-2 LAN Screens packets. When set to Both or Out Only, the HomeSafe will broadcast its routing table periodically. When set to

Strany 336 - Macintosh OS 8/9

HomeSafe User’s Guide viii Table of Contents 6.1 Wireless LAN Overview ...

Strany 337 - Macintosh OS X

HomeSafe User’s Guide LAN Screens 5-3 use the computer to access the Internet without changing the network settings, even when the IP addresses of

Strany 338

HomeSafe User’s Guide 5-4 LAN Screens 5.5 Configuring IP Click LAN to open the IP screen. Figure 5-2 LAN : IP The following table describes the f

Strany 339 - Appendix F

HomeSafe User’s Guide LAN Screens 5-5 Table 5-1 LAN : IP LABEL DESCRIPTION First DNS Server Second DNS Server Third DNS Server Select From ISP

Strany 340

HomeSafe User’s Guide 5-6 LAN Screens Table 5-1 LAN : IP LABEL DESCRIPTION Active Select this option to activate the Any-IP feature. This allows a

Strany 341

HomeSafe User’s Guide LAN Screens 5-7 Table 5-2 LAN : Static DHCP LABEL DESCRIPTION # This is the index number of the Static IP table entry (row).

Strany 342

HomeSafe User’s Guide 5-8 LAN Screens Table 5-3 LAN : IP Alias LABEL DESCRIPTION RIP Direction RIP (Routing Information Protocol, RFC1058 and RFC 1

Strany 343 - Appendix G

HomeSafe User’s Guide Wireless Configuration and Roaming 6-1 Chapter 6 Wireless Configuration and Roaming This chapter discusses how to conf

Strany 344

HomeSafe User’s Guide 6-2 Wireless Configuration and Roaming Figure 6-2 Basic Service set 6.1.3 ESS An Extended Service Set (ESS) consists of a ser

Strany 345 - Types of EAP Authentication

HomeSafe User’s Guide Wireless Configuration and Roaming 6-3 6.2 Wireless LAN Basics Refer also to the Wizard Setup chapter for more backgr

Strany 346

HomeSafe User’s Guide 6-4 Wireless Configuration and Roaming ) Enabling the RTS Threshold causes redundant network overhead that could negatively a

Strany 347 - Recommendation

HomeSafe User’s Guide Table of Contents ix UPnP, Parental Control and Firewall ...

Strany 348 - Positioning Antennas

HomeSafe User’s Guide Wireless Configuration and Roaming 6-5 Table 6-1 WLAN : Wireless LABEL DESCRIPTION Enable Wireless LAN Click the check

Strany 349 - Protection

HomeSafe User’s Guide 6-6 Wireless Configuration and Roaming station may not be able to communicate with other wireless stations on the network and

Strany 350

HomeSafe User’s Guide Wireless Configuration and Roaming 6-7 Figure 6-7 WLAN : Roaming The following table describes the labels in this scre

Strany 352 - Gateways on the WAN Side

HomeSafe User’s Guide Wireless Security 7-1 Chapter 7 Wireless Security This Chapter describes how to use the MAC Filter, 802.1x, Loc

Strany 353 - Appendix L

HomeSafe User’s Guide 7-2 Wireless Security Figure 7-2 WLAN : Wireless : No Security The following table describes the labels in this screen. Table

Strany 354

HomeSafe User’s Guide Wireless Security 7-3 Table 7-1 WLAN : Wireless : No Security LABEL DESCRIPTION Reset Click Reset to reload the previous conf

Strany 355

HomeSafe User’s Guide 7-4 Wireless Security Figure 7-3 WEP Authentication Steps Open system authentication involves an unencrypted two-message proc

Strany 356

HomeSafe User’s Guide Wireless Security 7-5 Select Dynamic to have the HomeSafe automatically use short preamble when all wireless clients support

Strany 357

HomeSafe User’s Guide 7-6 Wireless Security Table 7-3 WLAN : Wireless : Static WEP Encryption LABEL DESCRIPTION Key 1 to Key 4 The WEP keys are used

Komentáře k této Příručce

Žádné komentáře