ZyXEL Communications ES-2024 Series Uživatelská příručka Strana 38

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 284
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 37
ES-4024A User’s Guide
Chapter 2 Hardware Installation and Connection 37
CHAPTER 2
Hardware Installation and
Connection
This chapter shows you how to install and connect the switch.
2.1 Freestanding Installation
1 Make sure the ES-4024A is clean and dry.
2 Set the ES-4024A on a smooth, level surface strong enough to support the weight of the
ES-4024A and the connected cables. Make sure there is a power outlet nearby.
3 Make sure there is enough clearance around the ES-4024A to allow air circulation and the
attachment of cables and the power cord.
4 Remove the adhesive backing from the rubber feet.
5 Attach the rubber feet to each corner on the bottom of the ES-4024A. These rubber feet
help protect the ES-4024A from shock or vibration and ensure space between devices
when stacking.
Figure 6 Attaching Rubber Feet
Note: Do NOT block the ventilation holes. Leave space between devices when
stacking.
For proper ventilation, allow at least 4 inches (10 cm) of clearance at the front
and 3.4 inches (8 cm) at the back of the switch. This is especially important for
enclosed rack installations.
Zobrazit stránku 37
1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 283 284

Komentáře k této Příručce

Žádné komentáře