ZyXEL Communications VSG1432 Uživatelská příručka Strana 57

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 408
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 56
Chapter 4 Tutorials
VSG1432-B101 Series User’s Guide
57
the ZyXEL Device. Traffic should be forwarded to the port 666 of the Doom server
computer which has an IP address of 192.168.1.34.
Tutorial: NAT Port Forwarding Setup
Thomas may set up the port settings by configuring the port settings for the Doom
server computer (see Section 12.2 on page 176 for more information).
1 Click Network Settings > NAT > Add new rule and configure the screen with
the following values:
2 The screen should look as follows. Click Apply.
D=192.168.1.34
WAN
LAN
port 666
A
Service Name Doom_Server
WAN Interface Select the WAN interface through which the Doom service is
forwarded. This example uses MyDSLConnection.
External Port/s Enter 666 as the Start and End port.
Server IP Address Enter the IP address of the Doom server. This is 192.168.1.34
for this example.
Protocol Select TCP/UDP. This should be the protocol supported by the
Doom server.
Zobrazit stránku 56
1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 407 408

Komentáře k této Příručce

Žádné komentáře