Zyxel-communications WPA-1000 Uživatelský manuál stáhnout pdf (Strana 46)

Chapter 4 The Web Configurator Screens

WPA-1000 User’s Guide

4.6.4 Example Network Configuration

In this example, your notebook has a wired connection to the company network (N) and

receives an IP address automatically from the company DHCP server. It has a wireless

connection to the WPA-1000. The WPA-1000 is set to use its default IP address and is also set

to be a DHCP server.

Figure 27 Wireless Direct

These are the screen configurations.

Disable Disable DHCP service if you have another DHCP server in your network, or you

want to manually configure computers in your network with TCP/IP information.

Wireless Setup

SSID The SSID identifies this WPA-1000 in the list of available wireless uncorks. The

default SSID is ZyXEL. It is recommended you change this to a unique SSID in

order to identify your WPA-1000 in the wireless network list.

Channel Set the WPA-1000’s wireless connection channel. All devices that want to be in

the WPA-1000’s wireless network must be use the same channel. Select a

channel that is not being used by other APs in the vicinity.

WEP Select an WEP security mode to encrypt data you send over the network. 128-bit

is more secure than 64-bit, but may have slower throughput. If you select

Disable, then anyone within range nay connect to the WPA-1000 without need of

a password.

Key This is the key used to encrypt data wireless communicated between the WPA-

1000 and wireless clients. If you choose 128-bit WEP, then enter 13 ASCII

characters or 26 hexadecimal digits here.

If you choose 64-bit WEP, then enter 5 ASCII characters or 10 hexadecimal

digits here.

Gatekeeper Select All Block if you only want DHCP information to be allowed through to

users connected to the WPA-1000 from the company network or the Internet.

Select All Pass if you only want all traffic to be allowed through to users

connected to the WPA-1000 from the company network or the Internet.

Select Internet Only if you only want ‘Internet-related traffic’, such as HTTP, FTP

and so on to be allowed through to users connected to the WPA-1000 from the

company network or the Internet. See Section 4.6.2 on page 43 for more details.

Apply Click Apply to save your settings.

Cancel Click Cancel to return to the previous settings.

LABEL DESCRIPTION

INTERNET

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 159 160

Žádné komentáře

Zyxel-communications WPA-1000 Uživatelský manuál Strana 46