Zyxel-communications P-660HN-TxA Uživatelský manuál stáhnout pdf (Strana 141)

Chapter 9 Network Address Translation (NAT)

P-660HN-TxA User’s Guide

141

9.3.2 The Port Forwarding Rule Edit Screen

Use this screen to edit a port forwarding rule. Click the rule’s edit icon in the Port

Forwarding screen to display the screen shown next.

Figure 67 Network > NAT > Port Forwarding: Edit

The following table describes the fields in this screen.

Table 43 Network > NAT > Port Forwarding: Edit

LABEL DESCRIPTION

Rule Setup

Active Click this check box to enable the rule.

Service Name Enter a name to identify this port-forwarding rule.

Start Port Enter a port number in this field.

To forward only one port, enter the port number again in the End Port

field.

To forward a series of ports, enter the start port number here and the end

port number in the End Port field.

End Port Enter a port number in this field.

To forward only one port, enter the port number again in the Start Port

field above and then enter it again in this field.

To forward a series of ports, enter the last port number in a series that

begins with the port number in the Start Port field above.

Server IP

Address

Enter the inside IP address of the server here.

Port

Translation

Start / End

Port

Enter the start port number here to which you want the device to

translate the incoming port. For a range of ports, you only need to enter

the first number of the range to which you want the incoming ports

translated, the device automatically calculates the last port of the

translated port range.

Back Click this to return to the previous screen without saving.

1 2 ... 136 137 138 139 140 141 142 143 144 145 146 ... 323 324

Žádné komentáře

Zyxel-communications P-660HN-TxA Uživatelský manuál Strana 141