Zyxel-communications P-660H-D Series Uživatelský manuál Strana 208

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 421
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 207
P-660R/H-D Series User’s Guide
207 Chapter 22 Internet Access
Figure 108 Menu 1 General Setup
22.6 Internet Access Configuration
Menu 4 allows you to enter the Internet Access information in one screen. Menu 4 is actually
a simplified setup for one of the remote nodes that you can access in menu 11. Before you
configure your Prestige for Internet access, you need to collect your Internet account
information.
Note that if you are using PPPoA or PPPoE encapsulation, then the only ISP information you
need is a login name and password. You only need to know the Ethernet Encapsulation
Gateway IP address if you are using ENET ENCAP encapsulation.
From the main menu, type 4 to display Menu 4 - Internet Access Setup, as shown next.
Figure 109 Menu 4 Internet Access Setup
The following table contains instructions on how to configure your Prestige for Internet access
Menu 1 - General Setup
System Name= ?
Location= location
Contact Person's Name=
Domain Name=
Edit Dynamic DNS= No
Route IP= Yes
Bridge= No
Press ENTER to Confirm or ESC to Cancel:
Menu 4 - Internet Access Setup
ISP's Name= MyISP
Encapsulation= RFC 1483
Multiplexing= LLC-based
VPI #= 8
VCI #= 35
ATM QoS Type= CBR
Peak Cell Rate (PCR)= 0
Sustain Cell Rate (SCR)= 0
Maximum Burst Size (MBS)= 0
My Login= N/A
My Password= N/A
ENET ENCAP Gateway= N/A
IP Address Assignment= Static
IP Address= 0.0.0.0
Network Address Translation= SUA Only
Address Mapping Set= N/A
Press ENTER to Confirm or ESC to Cancel:
Zobrazit stránku 207
1 2 ... 203 204 205 206 207 208 209 210 211 212 213 ... 420 421

Komentáře k této Příručce

Žádné komentáře