Zyxel-communications P-335WT Uživatelský manuál Strana 295

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 509
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 294
P-335 Series User’s Guide
Chapter 25 Menu 3 LAN Setup 295
25.4 Wireless LAN Setup (P-335WT only)
Use menu 3.5 to set up your Prestige as the wireless access point. To edit menu 3.5, enter 3
from the main menu to display Menu 3 – LAN Setup. When menu 3 appears, press 5 and then
press [ENTER] to display Menu 3.5 – Wireless LAN Setup as shown next.
IP Subnet Mask Your Prestige will automatically calculate the subnet mask based on the IP
address that you assign. Unless you are implementing subnetting, use the subnet
mask computed by the Prestige.
RIP Direction Press [SPACE BAR] and then [ENTER] to select the RIP direction. Options are
Both, In Only, Out Only or None.
Version Press [SPACE BAR] and then [ENTER] to select the RIP version. Options are RIP-
1, RIP-2B or RIP-2M.
Incoming Protocol
Filters
Enter the filter set(s) you wish to apply to the incoming traffic between this node
and the Prestige.
Outgoing Protocol
Filters
Enter the filter set(s) you wish to apply to the outgoing traffic between this node
and the Prestige.
When you have completed this menu, press [ENTER] at the prompt [Press ENTER to Confirm…] to
save your configuration, or press [ESC] at any time to cancel.
Table 101 Menu 3.2.1: IP Alias Setup
FIELD DESCRIPTION
Zobrazit stránku 294
1 2 ... 290 291 292 293 294 295 296 297 298 299 300 ... 508 509

Komentáře k této Příručce

Žádné komentáře