Zyxel-communications Omni TA128 Uživatelský manuál stáhnout pdf (Strana 145)

133

S-Register Descriptions

The descriptions for each S-register. In most bit-mapped S-

registers, the default bit value is 0 (which is the normal situation)

and only the non-default situation is described. Some reserved bits

are for factory use and the user should not change them.

Values followed by an asterisk * are the factory default settings.

Basic S-Registers "ATSn=x"

Command Function & Description Ref.

S0= Set the number of rings on which the TA will

answer. A 0 value disables auto-answer.

+000

S1= Counts and stores number of rings from an

incoming call.

+000

S2= Define escape code character, default <+> (43

dec.).

+043

S3= Define ASCII Carriage Return. +013

S4= Define ASCII Line Feed. +010

S5= Define ASCII Backspace. +008

S7= Set duration, in number of seconds, TA waits

for a carrier.

+060

S8= Set duration, in seconds, for pause (,) option

in Dial command and pause between

command re-executions for Repeat

(>)command.

+002

Extended S-Registers "ATSn=x"

Command bit dec hex Function and description Ref.

S15= bit dec hex Bit-mapped register. +130

0,1 0 0 Even parity.

1 1 Odd parity.

2 2 * No parity.

2 0 0 * 1 stop bit.

4 4 2 stop bits.

1 2 ... 140 141 142 143 144 145 146 147 148 149 150 ... 172 173

Žádné komentáře

Zyxel-communications Omni TA128 Uživatelský manuál Strana 145