Zyxel-communications Internet Security Appliance ZyWALL5UTM 4.0 Uživatelský manuál Strana 173

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 803
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 172
ZyWALL 5/35/70 Series User’s Guide
173 Chapter 9 Wireless LAN
9.3 WLAN Static DHCP
This table allows you to assign IP addresses on the WLAN to specific individual computers
based on their MAC addresses.
Every Ethernet device has a unique MAC (Media Access Control) address. The MAC address
is assigned at the factory and consists of six pairs of hexadecimal characters, for example,
00:A0:C5:00:00:02.
To change your ZyWALLs WLAN static DHCP settings, click NETWORK, WLAN and
then the Static DHCP tab. The screen appears as shown.
Allow between
WLAN and DMZ
Select this check box to forward NetBIOS packets from the LAN to the DMZ and
from the DMZ to the WLAN. If your firewall is enabled with the default policy set to
block DMZ to WLAN traffic, you also need to enable the default DMZ to WLAN
firewall rule that forwards NetBIOS traffic.
Clear this check box to block all NetBIOS packets going from the WLAN to the DMZ
and from the DMZ to the WLAN.
Apply Click Apply to save your changes back to the ZyWALL.
Reset Click Reset to begin configuring this screen afresh.
Table 49 WLAN (continued)
LABEL DESCRIPTION
Zobrazit stránku 172
1 2 ... 168 169 170 171 172 173 174 175 176 177 178 ... 802 803

Komentáře k této Příručce

Žádné komentáře