Zyxel-communications IES-612-51A Uživatelský manuál Strana 50

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 444
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 49
Chapter 3 Front Panel
IES-612-51A User’s Guide
50
3.2.1 Console Port
For local management, you can use a computer with terminal emulation software configured
to the following parameters:
VT100 terminal emulation
9600 bps
No parity, 8 data bits, 1 stop bit
No flow control
Connect the male 9-pin end of the console cable to the console port of the IES-612-51A.
Connect the female end to a serial port (COM1, COM2 or other COM port) of your computer.
3.2.1.1 Default Ethernet Settings
The factory default negotiation settings for the Ethernet ports on the IES-612-51A are:
Speed: Auto
Duplex: Auto
SYS Green On The IES-612-51A’s system is running.
Blinking The IES-612-51A is booting.
Off The IES-612-51A’s stem is not running.
ETHERNET
(1~2)
Green On The IES-612-51A has a successful 10 Mbps connection
on this port.
Blinking The IES-612-51A is sending/receiving data on this port.
Orange On The IES-612-51A has a successful 100 Mbps
connection on this port.
Blinking The IES-612-51A is sending/receiving data on this port.
ADSL (1~12) Green On The IES-612-51A has a successful DSL connection.
Blinking The IES-612-51A is looking for a DSL connection.
Off The IES-612-51A does not have a DSL connection.
Table 2 LEDs (continued)
LED COLOR STATUS DESCRIPTION
Zobrazit stránku 49
1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 443 444

Komentáře k této Příručce

Žádné komentáře