ZyXEL Communications P870HNU-51B Uživatelská příručka stáhnout pdf (Strana 18)

BASIC OPERATIONS ON THE ROUTER

Figure 3-7: Network options configuration in monouser static mode

Once completed these previous fields, press Apply and the router will be configured as

expected.

The router is configured to make the PC when asking for the IP address via DHCP, it will

receive the public IP address. At this moment, you will lose the IP connectiviy between your

PC and the router and it will not be recovered till the PC can renew the IP address. Refer the

help information in your operating system to check how to do it. In this moment you will

recover the connectivity back with the router to continue the configuration process.

Now go to Network -> WAN - > Internet connection and the screen in figure 3-3 will be

displayed. Then press the Edit icon under the Modify section. Make the according selections

as described below pressing in the different screen that will appear, pressing the Next bottom

on each screen to move to the next one.

- In the Select WAN service type screen: Select the option IP over Ethernet

- In the WAN IP Address screen : Select the option Use the following Static IP address

- In the NAT field: Disable the option Enable NAT

It is only required a management IP address (shown in the information received). In this

example, it will be used the 10.0.0.5, as can be shown in next screen.

3-8

ersion 1.1

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 31 32

Žádné komentáře

ZyXEL Communications P870HNU-51B Uživatelská příručka Strana 18